convex

But when the beam of the optical switch is formed, undercut occurs on the convex.

在腐蚀过程中光开关悬臂的凸角处产生了削角现象,利用表面硅原子悬挂键的分布特征对产生削角的原因作了合理解释,这为以后研究凸角补偿提供了理论依据。

The height, width and relief angle of surface relief produced by {259} f martensitic transformation is larger tha.

结果表明 :{ 2 5 9} f 马氏体表面浮凸为双倾动、帐篷 (∧ )型 ,{ 5 5 7} f 马氏体的表面浮凸为“孤立岛状”浮凸群 ,{ 2 2 5 } f 马氏体表面浮凸为具有层状结构的“三角形”浮凸群 ;{ 2 5 9} f 马氏体表面浮凸的宽度、高度及浮凸角度均大于 { 2 2 5 } f 马氏体“三角形”浮凸群 ,{ 5 5 7} f 马氏体表面浮凸群的高度最小 ,其浮凸角也最小。

Atomic force microscope (AFM) with high space resolution is used to characterize martensitic transformation surface relief, by observing the morphology and measuring the surface relief angles of stress-induced martensite in Fe-25Mn-6Si-5Cr(wt%) shape memory alloy and thermal-induced mart.

55C(wt%)合金中的热诱发马氏体的浮凸角。

In this arrangement, the cam lobes push against round metal cylinders called cam follower.

在这种布置中，凸轮凸角推动凸轮挺杆。

The camshaft has a cam, on which there is a lob, or bump.

凸轮轴上有一个凸轮，凸轮上有一个凸角。

Optimization design of axial symmetry concave-convex angle segment structure in the salient ring supported bulkhead

凸角处设舱壁的轴对称凹凸角舱段优化设计

As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).

当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。

The rotor has recesses in its three faces between the lobes.

转子在其凸角之间的三个面上有凹槽。

Optimization design of axial symmetric concave-convex angle segment structure in the nook ring supported bulkhead

凹角处设舱壁的轴对称凹凸角舱段优化设计

"After the cam lobe moves out from under the valve lifter, the valve spring forces the valve up onto its seat again."

当凸轮凸角离开气门挺杆,气门弹簧使气门重新回到气门座上。

allowable pressure angle of cam mechanism

凸轮机构的许用压力角

triangular asperities technique

三角形凸点密封技术

Having horns or hornlike projections.

有角的生有角或角状凸出物的

Hexagon head tapping screws with collar

GB/T16824.1-1997六角凸缘自攻螺钉

convex triangular ceramic indexable insert

凸三角形陶瓷可转位插刀

return bead and rebate joint

木框转角凹凸榫上联珠线脚

any outgrowth from the head of an organism that resembles a horn.

任何生物体头上凸起的角状的东西。

Study on the General Measuring Technique for Angle and Parameter of Cam;

角度及凸轮参数综合测试技术的研究

Characterizations to the Archimedean and the Convexity of Triangular Norms;

三角范数Archimedean性质的刻画及凸性问题

Generalization of the Triangle to Convex Curves in Minkowski Plane;

Minkowski平面三角不等式在凸曲线上的推广

Blending of Convex n-hedral Angles Based on B-net Method

基于B-网方法的凸n-面角的磨光