Explosion welding

Investigation on microstructure at the bonding interface of TiC cermet/steel composite plate prepared by explosive welding;

TiC硬质合金/碳钢爆炸焊接复合板界面微观组织

Numerical analysis of explosive welding interface layer based on δ function;

基于δ函数的爆炸焊接界面应力场数值分析

This paper presents an experimental study on the inward explosion welding of the clad tube onto the base tube.

本文对基管与复管的外包爆炸焊接进行了实验研究,观察了爆炸焊接界面的组织和波形,分析了用水作为铜管爆炸焊接的柔性芯模在减小基管爆炸缩径上的作用。

By adjusting explosion speed and density, interior explosion welding of the Al /stainless steel thin walled clad tube was researched (L/D≈60).

通过调整爆炸物的爆速、松装密度等参数,采用内爆炸法对铝/不锈钢细长双金属复合管(L/D≈60)的爆炸焊接进行初步的研究。

Under normal conditions,after explosion welding,no welding can be found in the area of the detonator,but serious damages and deformations can be found in its surrounding areas,which affects adversely the quality of the material.

在爆炸焊接工艺中,存在一种称为边界效应的物理现象。

Some problems dealt with the clad plates by explosive bonding were discussed.

讨论了爆炸接合复合板材研究中存在的问题,认为复合板材接合界面涉及到金属融体的非平衡凝固过程,可能会存在马氏体等固态相变,但不可能形成非晶态。

The test research of steel fibers concrete and steel fibers reinforcedconcrete in anti-contact explosion;

钢纤维混凝土、钢纤维钢筋混凝土抗接触爆炸试验研究

Failure effect of steel-fiber reactive power concrete (RPC) shelter plate under contact explosion;

钢纤维超高强活性混凝土(RPC)遮弹板接触爆炸破坏作用

Damage of thin plate subjected to contact explosion loading;

薄板在接触爆炸载荷作用下的破坏分析

Experimental Study on Low Detonation Velocity Expanding ANFO Explosive Used in Metal Explosive Welding

金属爆炸焊接用低爆速膨化铵油炸药实验研究

Nanocrystalline structure at explosive weld interface of 321 and Qd370qD steels

321钢/Qd370qD钢爆炸焊接界面纳米晶组织

Microstructure of cementite beside interface in 321/Qd370qD explosive welding

321/Qd370qD爆炸焊接界面渗碳体的微观结构

SAFETY ASSESSMENT AND SAFETY MANAGEMENT OF EXPLOSIVE WELDING PROCESS

爆炸焊接过程的安全评价与安全管理

Microstructural Features Beside Interface in 321/Qd370qD Explosive Welded Plate

321/Qd370qD爆炸焊接界面渗碳体特征

EFFECT OF MATERIAL STRENGTH ON FORMING PROCESS OF EXPLOSIVE WELDING INTERFACE WAVE

材料强度在爆炸焊接界面波形成过程中的作用

Experimental Study on the Exploding Welding of Ni-Ti Shape Memory Alloy;

镍钛形状记忆合金爆炸焊接技术的试验研究

The Study of the Process and the Rupture on the Explosion Welding-Rolling Ti-steel Composites Plate;

爆炸焊接—轧制钛钢复合板——工艺和断口形貌研究

Analysis of Effect Factors and Parameter Optimization on Explosive Cladding Quality;

爆炸焊接质量的影响因素及参数优化分析

DISCUSSION OF APPLICABILITY OF EXPLOSIVE WELDING TECHNOLOGY TO EQUIPMENT RUSH-REPAIRING

爆炸焊接技术在装备抢修中的应用性分析

Simulation of effects of stand-off distance on explosive welding of three-layer tubes

间隙对三层圆管爆炸焊接影响的数值模拟

Experiment and Analysis on Jointing of Tool Steel and Carbon Steel by Explosive Welding

工具钢-普碳钢复合板爆炸焊接试验与分析

Numerical Simulation and Analysis for Explosive Welding of Large Area Ti/Steel Composite Board;

大面积钛/钢复合板爆炸焊接过程的有限元模拟与分析

Effect of Explosive Welding Parameter on Composite Plates Interface Structure and Mechanical Properties;

爆炸焊接参数对复合板界面组织及力学性能的影响

Researches of Impact Dynamics Problems and Prepared Bulk Metallic Glass Composite by Explosive Welding

块体非晶复合材料爆炸焊接冲击动力学问题研究及其实验制备

Explosive Mass-Bonding Property in Aluminum Alloy-Steel Explosive Welding

铝合金-钢爆炸焊接装药量与界面性能的关系(英文)

Analysis & Experimental Research of Defects in Interface Caused by Gap Pillars in Explosive Welding

爆炸焊接间隙与复合界面缺陷形成机理的试验研究

Calculation of the Angle Deformation in Explosive Welding Based on the Ideal Fluid Model of Symmetrical Colliding

基于理想流体对称碰撞模型的爆炸焊接流场角变形计算