flexure scarp

Aiming at solving the serious problem resulting from the displacement function of the geometric non-linear bent cantilever and its great error ,the author has the function deduced from approximate calculation and Galerkin integration.

针对以往几何非线性悬臂弯曲的位移函数公式繁琐或计算结果误差较大的问题,通过近似并利用加辽金积分推导得出其位移函数。

Application of Overhang Plate in Widening of Cliffy Steep Slope Road-Section's Subgrade in Mountain Area

悬挑板在山区悬崖高陡边坡路段路基加宽中的应用

Research of actuation characteristic of a curved cantilever electrostatic actuator;

弯曲悬臂梁静电执行器驱动特性的实验研究

It can accurately tell us where is the error and what is the error and avoid the "cliff effect".

错误检测处理(EDH)技术是伴随着数字电视的发展而产生的一种数字信号检测技术,它能准确地标识出信号传输时所发生错误的位置及类型,防止“悬崖效应”的发生。

Specimen for surface crack growth by loading at cantilever bend and application

一种悬臂弯曲加载表面裂纹扩展试样及其应用

Bending behaviors of functionally gradient piezoelectric curved cantilever was studied.

研究了弯曲型梯度功能压电悬臂梁的弯曲特性。

Research on bending of the cantilever based on the principle of minimum potential energy

基于最小势能原理的悬臂梁弯曲研究

BOUNDARY INTEGRAL FORMULA FOR BENDING OF CLAMPED SEMI-INFINITE PLATE

悬臂半无限大板弯曲的边界积分公式

Research of actuation characteristic of a curved cantilever electrostatic actuator

弯曲悬臂梁静电执行器驱动特性的实验研究

Hamiltonian system approach to bending problem of viscoelastic cantilever-beams

粘弹性悬臂梁弯曲变形的哈密顿体系方法

Fourier analysis of bending of orthogonal anisotropic rectangular thin cantilever plate

正交各向异性矩形悬臂薄板弯曲的傅立叶分析

The pouring construction technology of small radius flat curve continuous steel bridge cantilever

小半径平弯曲线连续刚构桥悬臂浇筑施工技术

Simulation Analysis and Curing Effect Research of Curved Continuous Rigid Frame Bridge during Cantilever Construction;

曲线连续刚构桥悬臂施工阶段的仿真分析及弯曲效应研究

overhung cold roll forming machine

悬臂辊式冷弯成型轧机

knee-braced bracket

拐弯托座，膝形悬臂托架

Bending deformation of microscale cantilever has been investigated using an atomic force microscope( AFM).

采用原子力显微镜测试了微悬臂梁构件的弯曲变形规律。

flex one's stiff arm slowly

慢慢弯曲僵硬的手臂

Abstract: Using the united method in this paper, the bending solution of the rectangular plate with one edge built-in and one or two corner point supported can be derived under arbitrary load.

文摘:本文的统一解法可以解决悬臂板或带有角点支承时在任意荷截作用下的弯曲。

The First six natural frequencies of a cantilevered triangular bending plate are calculated both by the conventional finite element and by the second order linite dynamic element.

用常规有限元和二次动态有限元解算了一个悬臂三角形弯曲板的前六阶固有频率。

Using the united method in this paper, the bending solution of the rectangular plate with one edge built-in and one or two corner point supported can be derived under arbitrary load.

本文的统一解法可以解决悬臂板或带有角点支承时在任意荷截作用下的弯曲。

It is found that non-zero normal stresses exist in the gradient piezoelectric curved cantilever when the cantilever is subjected to an external voltage.

研究表明，当受外加电压作用时，弯曲型梯度压电悬臂梁中存在非零的应力。

The Study and Design of Arm Robot for Hull Shaped Plate Forming by Line Heating;

水火弯板成型单悬臂机器人设计分析