annealing recrystallization

The recrystallization that widely occurred in mylonite is a softening process.

重结晶作用在糜棱岩中广泛存在,是与应变硬化相反的一种软化作用。

By combining with the occurrence,the medium-coarse crystalline dolomite is predicted to be the recrystallization of the powder-fine dolomite under the effect of hydrothermal fluid.

再结合其产状特征,可以推测塔中地区中—粗晶白云岩是粉—细晶白云岩在热液作用下发生重结晶作用的结果。

Zircon from various rocks may suffer from Pb diffusion loss,metamictization caused by lattice radiation damage,and recrystallization.

来自不同类型岩石中的锆石可能经历了Pb的扩散丢失作用、晶格损伤导致的蜕晶化作用以及变质重结晶作用。

Model of recrystallization annealing and properties of niobium microalloyed high strength steel sheet after cold rolling;

高强冷轧铌钢的再结晶退火与性能模型

Study on Modeling and Simulation of Recrystallization Annealing Process for Material with Second Phase Particle by Cellular Automata Method;

二相粒子材料再结晶退火的元胞自动机模型及其模拟研究

EBSD investigation of cold-rolled non-oriented silicon steel in recrystallization annealing process

冷轧无取向硅钢再结晶退火过程的EBSD分析

The Study for the Effect of Recrystallization Annealing on Structure and Texture of IF Steel;

再结晶退火对IF钢组织、织构影响的研究

A satificatory effect is obtained by rime annealing.

采用再结晶退火工艺处理，可取得满意效果。

Influence of recrystallization annealing on microstructure and texture of the RE aluminum foil

再结晶退火对稀土铝箔组织与织构的影响

EBSD investigation of cold-rolled non-oriented silicon steel in recrystallization annealing process

冷轧无取向硅钢再结晶退火过程的EBSD分析

Study on Modeling and Simulation of Recrystallization Annealing Process for Material with Second Phase Particle by Cellular Automata Method;

二相粒子材料再结晶退火的元胞自动机模型及其模拟研究

Study on Modeling and Simulation of Recrystallization Annealing Process for Textural Materials by Monte Carlo Method;

织构材料再结晶退火的蒙特卡罗模型及其模拟研究

Effect of Recrystallization Annealing Temperature on Microstructure of Cold Deformation Duplex Stainless Steel 00Cr22Ni5Mo3N

再结晶退火对冷变形00Cr22Ni5Mo3N双相不锈钢显微组织的影响

Effects of Recrystallization Annealing Process on Development of Cube Textured of Ni-5at%W Alloy Substrate

再结晶退火工艺对Ni-5at%W基带立方织构形成的影响

The formation of a new set of strain-free grains within a previously cold-worked material; normally an annealing heat treatment is necessary.

在冷塑性变形材料的内部生成等轴状新晶粒的过程叫再结晶，通常发生于再结晶退火热处理过程中。

Effect of the Recrystal Texture During the Continuous Annealing Process by the Chemical Composition and the Temperature

化学成分及退火温度对连续退火再结晶织构的影响

Study on Recrystallization Behavior of Ferritic Rolled IF Steels;

铁素体区轧制IF钢退火过程再结晶规律的研究

Study on Compression Deformation and Annealing Recryastallization of AZ31 Magnesium Alloy;

AZ31镁合金压缩变形及退火再结晶的研究

Study on Evolution Law of Recrystallization Textures in Ti-IF Steel During Annealing

Ti-IF钢罩式退火过程中再结晶织构演变规律研究

Mechanism on Annealing Recrystallization of Al-Zn-Mg-Cu-Sc Alloy

Al-Zn-Mg-Cu-Sc合金的退火再结晶机制研究

The degree of crystallinity can be increased by annealing in an inert atmosphere.

结晶度可通过在惰性气体中的退火处理来提高。

Nanostructure Transformation of Magnetic Amorphous Alloy Nd_9Fe_(85)B_6 under High Pressure

高压退火磁性非晶合金Nd_9Fe_（85）B_6的纳米结构转变

The Study on the Effect of Annealling Temperature to the Fe-based Amorphous Structure

退火温度对Fe基纳米晶薄带结构特性影响研究

THE MEASUREMENTS OF ARSENIC DISTRIBUTION AND ITS REDISTRIBUTION AFTER THERMAL ANNEALING BY RBS

用背散射方法研究砷离子注入单晶硅的分布和热退火后的再分布