parallel slit domain

By using the Somigliana representation and the concept of finite-part integrals, a set of hypersingular integral equations for the interaction between two parallel planar cracks in a three-dimensional finite they subjected to arbitrary loads is derived, and then the numerical methed for solving is proposed by combining the finite-part integral methed with boundary element method.

利用Somigliana公式及有限部积分的概念，导出了含两平行平片裂纹三维有限体裂纹干扰问题的超奇异积分方程组，联合使用有限部积分与边界无法，建立了数值求解方法。

By using the analytic theory of hypersingular integral equations in three-dimensional fracture mechanics,the interactions between two parallel planar cracks under arbitrary loads are investigated.

本文利用三维断裂力学的超奇异积分方程求解理论，对三维无限体中两平行平片裂纹在任意载荷作用下的相互干扰问题作了研究。

Interaction between offset parallel cracks and combination conditions

平行偏置裂纹相互作用及其合并条件

Interaction between offset parallel cracks and combination conditions

平行偏置裂纹相互作用及其合并条件

Cracks grow in directions nearly parrallel to the surface.

裂纹在近乎平行于表面的方向上生长。

EFFECTS OF LOAD PARALLEL TO THE CRACK ON THE FATIGUE CRACK PROPAGATION RATE

平行于裂纹方向的载荷对于疲劳裂纹扩展速率的影响

EFFECTIVE MODULI OF AN ELASTIC SOLID WEAKENED BY A PARALLEL ARRAY OF MICROCRACKS

平行微裂纹削弱的弹性体的各向异性有效性能与双周期裂纹模型

Detailed siress analysis was carried out for a section of the pipeline including an eccentric reducer on which long cracks appeared twice.

进而对曾两次出现长裂纹的偏心异径管管段进行细部应力分析。

splitting a ray into two parallel rays polarized perpendicularly.

使光波分裂成两束平行的垂直偏振的波。

The cracks are primarily parallel to the longitudinal direction of the girder and to the nominal bending stresses.

裂纹基本上平行于主梁纵向，既平行于名义弯曲应力。

Finite Element Analysis of the Anti-Plane Problem of a Doubly Periodic Parallelogram Array of Cracks

双周期平行四边形排列裂纹反平面问题的有限元分析

On Influence of Welded Joint on Fracture Parameter with Crack in Different Location

裂纹位置对焊接接头断裂参量的影响

Investigation of Fatigue Crack Deflection for A357 Casting Aluminium Alloy

A357铸造铝合金疲劳裂纹偏折研究

The morphology of crack propagation indicate that there is the toughening mechanism of whisker's pull- out and crack deflection.

裂纹进展形态表明,存在晶须拔出及裂纹偏转增韧机制。

off-center planeposition indicatio

偏心平面位置显示器

off center plan display

偏中心平面位置显示器

offset-centre plan position indicator

偏心平面位置指示器

off-centered plan position indicator

偏心式平面位置显示器

The Causes of Crankshaft Offset Grinding and Grinding Crack and Their Solutions;

曲轴偏磨与磨削裂纹的成因及解决办法

Except for a small length of web at the first fracture location, none of the cracks exhibited a brittle fracture mode of crack propagation.

除第一个断裂位置的一小段腹板外，没有一条裂纹显示出裂纹扩展的脆性断裂模式。

Study on Vibration Diagnosis of Crack in the Jacket Platform;

导管架海洋平台裂纹的振动诊断研究