inspirtory reserve capacity

Aliquation and inspiration tend to occur during the production of heat resistant aluminium alloys due to manufacturing and environmental factors.

在耐热铝合金制备过程中,由于工艺以及环境因素,很容易产生偏析和吸气。

Experimental investigation of air-breathing valveless pulse detonation engine;

吸气式无阀脉冲爆震发动机试验研究

This paper addressed the nozzle effect on the performance of an air-breathing pulse det- onation engine(PDE)by multi-cycle detonation experiments.

分别对采用不同面积比、不同长径比的收敛喷管、扩张喷管和收扩喷管的吸气式脉冲爆震发动机(PDE)进行了多循环爆震试验研究,着重研究了不同工作频率下喷管面积比和长径比对吸气式PDE性能的影响。

Based on the test of the single centrifugal fan, suction characteristic of the centrifugal fan in series is carried out.

为此,在离心风机单机吸气性能试验的基础上,进行了离心风机串联吸气性能试验,得出了串联吸气性能与单机吸气性能的关系,以及适于串联的工况条件,为串联风机的参数选择提供了试验依据。

Removing of microdose N_2 in high purity D_2 by getter;

吸气剂法去除高纯D_2中微量N_2

Improvement of Zr-C Getters by Surface Activation;

激活工艺和表面气体压强对一种改性锆石墨吸气剂吸气性能的影响

Improvement of vacuum induction getter melting system;

吸气剂真空感应熔炼系统的改进

The cause of forming desorption gas from pressure swing adsorption(PSA)unit of hydrogen plant and its compositions were introduced.

介绍了变压吸附(PSA)解吸气产生的原因,针对其组分特点,提出将其作燃料、作合成甲醇原料、脱二氧化碳后作制氢原料三种利用方案,并对这三种方案的优缺点进行分析。

,Ltd,three gas hydrocarbon suitable for hydrogen production material were selected: natural gas,PSA desorption gas and hydrogen-methane.

通过对中国石化上海石油化工股份公司芳烃事业部2#芳烃联合装置1#制氢装置蒸汽转化法制氢工艺轻油替代原料性质、杂质的分析,筛选出适宜作制氢原料的3种气体烃类:天然气、变压吸附法(PSA)解吸气、甲烷氢。