deluge system

The designs of the casting system,overflow system,cooling system and ejection mechanism of the die were stated in detail.

分析了铝合金轮毂的结构特点 ,介绍了铝合金轮毂压铸模的结构 ,并详细说明了模具浇注系统、溢流系统、冷却系统、推出机构的设

The paper illustrates this point in many aspects, including constant speed filtration control, V conduct water flush hole position, air system design, overflow system setting and artistic, human oriented design thoughts.

与国内通常的设计思路相比,法国得利满和OTV两大公司在均质滤料滤池的设计中有许多方面值得借鉴,笔者结合国内的设计方法,详述了法国公司在恒速过滤的控制、V形槽布水孔的位置、气路系统的设计、溢流系统的设置以及美观和人性化设计等方面的设计特点,为国内设计人员提供参考。

An introduction was made on the structure of the die casting die for the rear wheel hub of the motocycle and on the design of the pouring system,overflowing system,cooling system and demoulding mechanism.

分析了摩托车后轮毂的结构特点 ,介绍了摩托车后轮毂压铸模的结构 ,并详细说明了模具浇注系统、溢流系统、冷却系统、推出机构的设计。

An introduction was made on the structure of the die_casting die for the cylinder body of the small gasoline motor and on the design of the inner gate, overflowing system and cooling system.

介绍了小型汽油机缸体压铸模的结构及内浇口、溢流系统、冷却系统的设

In order to observe fluid field and temperature field of molten metal filling and solidifying process, the different pouring systems and overflowing system were designed to simulate die-casting process with numerical simulation method.

运用数值模拟的方法,对设计的锁芯压铸模不同的浇注系统和溢流系统进行模拟,分别观察液态金属充型及凝固过程中流场和温度场的分布。

Intelligent spray system setup in the laminar cooling process;

层流冷却过程喷水系统的智能设定方法

The designs of spray system and installation, hydraulic and electric control systems are presented for multiple-purpose road cleaning vehicle.

介绍了多功能道路清洗车喷水系统、液压系统和电气控制系统的设计,这些系统可使清洗车按不同要求进行各项作业,实现路面及相关设施的高压清洗、降尘、调湿、树木园林的喷洗和浇灌等多种功能。

Vacuum created in cooling system on engine cool-down is not being relieved through coolant reserve/overflow system.

引擎冷却时冷却系统所产生的真空没有通过冷却剂储存/溢流系统排放。

Study of Spilled Dyeing Machine Control System Based on ARM

基于ARM的溢流染色机控制系统研究

The Systematic Liquidity Risk and Premium of Shanghai Stock Exchange;

上海股票市场系统流动性风险溢价研究

Two Relief Valve System Dynamic Characteristics and Fault Simulation Analysis;

双溢流阀系统动态特性研究及故障仿真分析

Application of Proportional Relief Valve in Hydraulic Loading System of Tension Bearing Test Equipment

比例溢流阀在轴承试验液压加载系统中的应用

Research on the Relief Valve Energy-efficient and Low Noise in Automobile Power Steering System

汽车助力转向系统节能低噪声溢流阀性能研究

Study of loading simulation system with a electric-hydraulic proportional relief valve

基于电液比例溢流阀的模拟加载系统研究

The coupled system dynamical characteristic anlysis of chut-flow-dam body of overfall concrete face rockfill dam

溢流混凝土面板堆石坝的泄槽—水流—坝体耦合系统动力特性分析

Characteristics of Combined Sewer Overflow during Rainfall in Central Area of Shanghai

上海中心城区合流制排水系统雨天溢流水质研究

Synchronous optimal control method on multi-motor of overflow dyeing machine extracting cloth system

溢流染色机提布系统的多台电动机同步最优控制方法

Turn the cap only to the first stop to permit any pressure in the system to be released through the overflow tube. Then turn the cap further to remove it

稍微转动一下水箱盖,使系统内的压力通过溢流管释放掉,然后继续转动水箱盖直至卸掉

Effects of Variable Discharge Coefficient Models on Steady-state Simulation of Pilot Relief Valves

先导式溢流阀变流量系数模型静态仿真研究

Study on fluid dynamics of AMS-H_2-Al_2O_3 system in Up-flow fixed-bed reactor

AMS-H_2-Al_2O_3体系溢流床反应器流体力学研究

"Error modifying System Boot Options, Space Overflow

"修改系统启动选项时出错，空间溢出

Study on Marine Oil Spill Response Information System Based on WebGIS;

基于WebGIS的海上溢油应急信息系统研究

The System of Assessment & Compensation for Oil Pollution Damage from Ships in Dalian Bay;

大连湾船舶溢油损害评估及索赔系统

Development of Oil Spill Simulation Information System Based on ECDIS

基于ECDIS的溢油模拟信息系统研制

Development of Oil Spilled Information System of ZhouShan Harbor Based on ECDIS

基于ECDIS的舟山港溢油信息系统研制