manometric head

The model was used to describe the relationships between the input signals related to melt temperature and die pressure and the output signals concerning heat.

在聚合物精密挤出成型加工过程中,机头熔体温度与机头压力是影响精密挤出成型制品质量的关键因素。

Study on pressure head distribution along the gravity flexible hoses;

自压软管沿程压力水头分布研究

The effects of slope,pressure head,porous distance and pipe length on the longitudinal pressure distribution were studied.

通过室内试验并结合水力学理论分析多孔管沿程压力分布规律,研究了坡度、压力水头、孔距、管长4个参数对沿程压力分布的影响。

A Numerical Simulation of Pressure-adjusting Devices of Complete Fluidic Sprinklers

全射流喷头压力调节装置流场数值模拟

Experimental of effect of water mist nozzle injection pressure on fire extinguishing

细水雾喷头喷射压力影响灭火性能的实验

minimum working pressure of rotating sprinkler

旋转式喷头最小工作压力

Study on the Bottom Hole Pressure Properties of the Oscillating Pulse Jet-Nozzled Bit

振荡脉冲射流喷嘴钻头井底压力特性研究

The solution is filtered and pumped through the fine holes of a spinneret.

纺丝液经过滤后,借助于泵的压力穿过喷丝头的细孔。

maximum working pressure of blowout preventer

防喷器最大工作压力

open flow pressure

油井敞喷时的油藏压力

knapsack sprayer with pressurized cylinder

背负式压力筒喷雾器

hydraulicefficiency ram

液力压头液压缸柱塞

resistance head

阻力压头(用压头表示的阻力损失)

Graphical Solution of Pressure Variation at Pump End aud Injection End of Diesel Injection Pump

柴油机喷油结束泵端和喷端压力波动图解

Three Dimensional Numerical Simulation on Single Atomizer Blend Flow Pressure Spray Dryer;

单喷嘴混流压力式喷雾干燥塔三维数值模拟

Measure Methods of Spray Distribution in Radial Direction of Pressure Atomization Nozzle

压力式雾化喷嘴径向喷淋密度的测量方法

Application of Large Displacement and High Pressure Pump in High-pressure Grouting Construction

高喷灌浆施工中大排量大压力高喷泵的应用

Experimental Study of Hydrajet Nozzle on Abrasion

水力喷砂射孔压裂喷嘴的损伤试验与分析

CFD Analysis for Effect of Injection Pressure Fluctuation on Cavitating Flow in Diesel Engine Nozzle

喷油压力波动对喷嘴内空穴发展影响的CFD分析

A high-velocity fluid stream forced under pressure out of a small-diameter opening or nozzle.

喷射流体在压力迫使下从小喷嘴或小孔中喷出的高速流体

Before initial dose, depress pump4-5 times or until primed.

首次使用本产品前，请按压喷头4-5次，直到可以喷出本产品。