signal-flow

This paper introduces a novel automatic physical synthesis methodology for analog circuits based on the signal-flow analysis.

提出了一种新的基于信号流分析的模拟电路版图综合方法。

The current signals with splash or without splash are processed using cepstrum transform in spot welding,and then the plots of the cepstrum are compared.

飞溅将引起电流信号的异常变化。

Based different dealing ways of voltage and current signals in Siemens analog input modular EM231,two normal signal-proceeding programs are given after the analysis of modular inner proceed procedure in this paper.

针对西门子模拟量输入模块EM231同一端口接受电压信号和电流信号不同方式,分析了EM231内部处理过程中比例斜率的变化,给出了处理电压信号和电流信号的两种通用程序。

This paper introduces that current signals of power system are acquired by Rogowski coil through optical fiber transmission system to low voltage side,which overcome the strong electromagnetic interference between the high-voltage signals,finaly transmission signals are send into the MSP430 to achieve signal measurement and display to improve the accuracy of measurement.

介绍了使用Rogowski线圈采集电力系统中的电流信号及通过光纤传输系统把采集的信号传送到低压侧的设计方案,利用MSP430单片机实现信号的测量和显示,对采用Rogowski线圈的测量方案以及系统设计软硬件的实现方法进行了分析。

According to the characteristic of red light and infrared light having change after uptake finger,this paper has studied blood signal acquisition system that based on single-chip microprocessor AT89C52.

根据红光和红外光透过手指后光吸收量变化的特点,本文研究了基于单片机AT89C52的血流信号采集系统。

Application of the signal-flow graph to modeling and calculation of oxidation-reduction equilibrium system

信号流图在氧化还原反应平衡系统建模与计算中的应用

A new method for establishing the status equation of circuit is given in the paper,in which the 2b circuit signal-flow graph is simplified as status matrix flow graph.

信号流图是建立状态方程的一种有效工具,给出了一种新的建立电路状态方程的方法,把电路的2b信号流图化简为一种状态矩阵流图,该流图仅含有独立节点,状态变量及其导数节点。

A new method for establishing the state equation of circuit is given in this paper in which the signal-flow graph is simplified as a state matrix flow graph, and all the calculation formulue for the transmission matrix are deduced, so it is easy to obtain the state equation.

本文给出了一种新的建立电路状态方程的方法，文中把信号流图简化为一种状态矩阵流图，并导出了矩阵流图中各传输矩阵的计算公式，由此很容易写出状态方程。

signal flow, processing, control engineering, data block

信号流, 处理, 控制工程, 数据块

amplify the sound, electric current, signal

增强声音、 电流、 信号.

DC component in the vision signal

图像信号的直流分量

a signal that involves visual communication.

需要视觉交流的信号。

Transition, Control Flow, Object Flow, Signal Send and Signal Receipt

转换、控制流、对象流、信号发送和信号接收

ringdown signaling

低频监察信号 -用低频电流传送监察信号

Research on Signal Modeling、Signal Processing and System for Flow Sensors;

流量传感器信号建模、信号处理及系统研究

a complete electrical circuit around which current flows or a signal circulates.

电流或信号能够流通的完全电路。

single-component signal

单成分信号 -交流信令中的

The ion current contains rich combustion information.

离子电流信号包含了丰富的燃烧信息。

effects caused by AC electric traction system on communication and railway signal equipments

交流电力牵引对通信信号的影响

Signal code, normal. Right-click for secondary flow.

信号码，标准。右击指定次级流。

Ringing and tone for telephone automatic switching network

GB3380-1982电话自动交换网铃流和信号音

("It carries a signal, not a current!"

（他大喊起来："那里面只有信号，没有电流。

Automatic exchange for voltage and current output.

仪器电压、出电流信号能够自动转换。

The signal consists of surges of electrons or electric current.

该信号是由电涌即电流所组成。

No signal means the solenoid is not energized.

没有信号，意味着电磁阀没有通电流。

Adds a telecommunications symbol to your workflow flowchart.

将电信符号添加到您的工作流程图中。