support pillar

Performance under force of column-supported steel silos under wind loading;

风荷载作用下柱支承钢筒仓的受力性能

This paper sets up the finite element model of the column-supported tube filler cast-in-situ hollow floor and the corresponding solid floor,and determines the element type and mesh partition scheme.

建立了柱支承筒芯内模现浇钢筋混凝土空心楼盖和对比实心楼盖的有限元模型,确定了单元类型和网格划分方案,分别对柱支承筒芯内模现浇钢筋混凝土空心楼盖和对比实心楼盖运用ANSYS软件进行了有限元分析,验证了有限元分析计算结果的正确性,并将柱支承筒芯内模现浇钢筋混凝土空心楼盖结果(应力、挠度)与对比实心楼盖相应结果进行比较,分析了柱支承筒芯内模现浇混凝土空心楼盖的变形特征,内力分布规律,可供设计人员参考。

The interaction between the structure and the beam-column supports in the form-finding process is taken into account.

用力密度法对梁-柱支承的张拉膜结构进行找形分析。

Especially the single support used in curved bridge can minimize the probability of the conflict between the pier base and the underground building.

箱形截面曲线连续梁桥良好的外形不仅符合桥梁美学的要求，而且有利于汽车的高速行驶，尤其是独柱支承曲线箱梁桥减小了桥梁基础与地下建筑物之间的冲突、增加了桥下空间的可利用性、扩大了视野，成为现代公路与城市道路中一种重要的桥型，广泛应用于高速公路及大型立体交叉桥梁工程中。

A single support continuous box girder bridge appeared bearing disengaging and girder slippage during its guardrail construction.

对某独柱支承连续箱桥在护栏施工时发生的支座脱空、梁体滑移事故,采用实体单元建立的整桥模型进行了施工及运营阶段受力分析。

5m distance between pillar base and wall foot, a woorkshop with H load-bearing pillars was successfully demolished by controlled blastingwith hole pattern arranged in the light of the principle of a blasting method with minor burden and wide hole spacing.

5m的情况下,运用小抵抗线宽孔距爆破法原理进行布孔,安全成功地拆除了一工形承载支柱厂房。

Study on Top-Down Construction Technology That Regarding the Structure Column as Center Brace

结构柱为中间支承柱的逆作法技术研究

The influence of elastic supporting column on integral stressed membrane structure

弹性支承柱对整体张拉膜结构的影响

Excessive friction in strut upper bearing

支柱上轴承磨损过度

Investigation into the Performance of Hydrostatic Support Column Pair of Radial Piston Pump;

径向柱塞泵静压支承圆柱副性能研究

Study and design of column-supported slab and its connection

柱支承双向板及板柱节点的设计与研究

The fork of a pole or other support.

柱子或其它支承物的叉状部件.

Replace the front strut upper mount and bearing

更换前支柱上固定座与轴承

Research on Sliding Shoes Hydrostatic Bearing of Water Hydraulic Axial Piston Pump;

水压轴向柱塞泵的滑靴静压支承研究

Investigation into the Piston Coupling and the Ball Friction Coupling Based on Hydrostatics Support on the Axial Piston Pumps;

轴向柱塞泵静压支承球铰副及柱塞副的理论研究

Struts are fixed to each side of the posts to provide further support to the ridge purloin.

立柱两侧安有对角撑,作为对脊檩的进一步支承。

With the car upside-down, the ball forces the plunger to seat against the guide plate.

当汽车倾倒时，滚珠迫使柱塞落在支承板上。

Structural Behavior of Column-Supported Steel Silos with a Transition Ring;

转折环梁加强的柱支承钢筒仓的结构行为研究

Study on the Large 131.50.3550 Three-rows-roller Rotative Bearing;

131.50.3550型三排滚柱式回转支承的研究与开发

The Stability Performance of RC. Curved Girder Bridge Supported by Single-Column;

独柱单点铰支承砼曲线梁桥的稳定性能研究

Structure Design and Experimental Study on Ultrasonic Levitation Bearing Which Support with Concave Cylindrical Surface

凹柱面支撑超声波悬浮轴承设计与实验研究

Direct Design Method Advice of Column-supported Cast-in-situ Hollow Floor

柱支承现浇空心楼盖的直接设计法建议

THE FREE VIBRATION ANALYSIS OF A BAEM PARTLY IMMERSED IN A FLUID ON COUPLED ELASTIC FOUNDATION

部分水下弹性支承等截面梁柱的自由振动分析

On law of abutment pressure distribution of coal pillar in shallow seam

浅埋煤层预留煤柱支承压力分布规律研究