melt spinning process

The hollow fiber membranes were prepared by melt-spinning.

经熔体纺丝制得聚氨酯系中空纤维膜,对纤维膜的微孔结构及其压力响应性能进行了研究,并分析了影响纤维膜压力记忆效应的因素。

Based on the principle of polymer blend phase separation and the way of washing-out additive to form the micro-voids,PEG as additive,PU/PVDF hollow fiber membrane was produced with the method of melt-spinning.

本文利用聚合物共混界面相分离原理,结合添加剂洗出成孔,以PU为共混基质、PVDF为分散相、PEG为添加剂,采用熔体纺丝技术,制备得PU/PVDF中空纤维膜;在此基础上,适当添加稀释剂,以PU为共混基质,以CaCO_3无机粒子为分散相,以PEG为添加剂,经较低的纺丝温度制得PU/CaCO_3中空纤维膜。

The methods and developments of fabricating functional fibers containing nanoparticles by electrospinning and melt spinning were reviewed.

阐述了采用静电纺丝和熔体纺丝法制备含纳米粉体功能性纤维的方法及其研究现状。

The technological process of melt spinning polyurethane;

聚氨酯熔法纺丝工艺路线

Study on Melt-spinning Polyurethane Based Hollow Fiber Membrane;

熔体纺丝法聚氨酯系中空纤维膜研究

Experimental Study of Producing Micro-Nano Fibers by Melt Electrospinning

熔体静电纺丝法制备微纳米纤维的实验研究

Compatibility of PVC/PS Blends with Melt Spinning

PVC/PS熔融纺丝体系的相容性

Spinning box is an important part of the melt spinning machine for synthetic fibre.

纺丝箱体是合成纤维熔融纺丝机中的一个重要部件。

Research on Pet Microfilaments by Melt Direct Spinning;

聚酯熔体直纺多孔细旦拉伸变形丝的研究

Nylon is meltspun. That is to say a molten mass of nylon, formed by melting nylon chips, is forced through holes in a spinneret.

尼龙是采用熔纺工艺制成的,即将由熔化的尼龙切片构成的尼龙熔融体,强制通过喷头的纺丝孔,

Numerical Analysis of Flowing for High Polymer in Spinning Pack and Optimization the Structural of It;

熔融纺丝组件熔体流动数值分析及其结构设计优化研究

Preparation of Nanofibers and PLA/LDHs Composite Fibers by Electrospinning Method;

熔体静电纺丝法制备聚合物纳米纤维及聚乳酸/水滑石复合纤维的制备研究

Melt spinning involves melting the nylon in an inert atmosphere, controlling the extrusion and solidification of the melt, and collecting the extruded filaments.

熔纺包括尼龙在惰性气体中的熔化、控制熔融体挤出和固化、卷绕挤出的长丝等几个过程。

Manufacture and Properties of Melt-Spun Heat-storage and Thermo-regulated Fiber Containing Microencapsulated Phase Change Materials;

熔融纺丝法智能温度调节纤维的研制与性能分析

screw-melter-fed spinning machine

螺杆式熔化器喂料纺丝机

A Study on PE/PP Fibers Prepared by Melt Electrospinning;

熔融静电纺丝制备PE/PP纤维的研究

Research on the Process of PA6/PET Blend Spinning

PA6/PET切片熔融共混纺丝工艺介绍

INFLUENCE OF POLYESTER MELT QUALITY ON SPINNABILITY OF DIRECT SPINNING POY

聚酯熔体质量对直纺POY可纺性的影响

FUSE #10 (IN FUSE BLOCK)

熔丝＃１０（熔丝块中）

Studies on Fiber Formation Mechanism in Melt-spinning Process and Development of HMLS Polyester Fibers;

熔融纺丝成形理论及HMLS涤纶纤维的研制

tow-to-sliver break spinning

丝束牵切成条纺纱法

Development of 56dtex/48f Fine-denier PET FDY Manufacture on 12 Ends Polymer-melt Directly Spinning Line;

熔体直纺56dtex/48f涤纶细旦FDY产品研制