melt index

Soft sensor method for polypropylene melt index based on FP-EFCM

基于机制建模与模糊建模相结合的聚丙烯熔融指数软测量方法

The prediction of the melt index and ethylene content for polypropylene (PP) was investigated, and both of them are the key quality index of PP production.

针对Spheripol工艺,根据Z-N催化剂聚合机理,对不同牌号聚丙烯产品(包括均聚聚丙烯、无规共聚聚丙烯和抗冲聚丙烯)分别建立了熔融指数和乙烯质量分率的预测模型。

The melt index (MI) ofpolypropylene (PP) has significant effects on the impregnation and interface forming process in GMT making.

聚丙烯的熔融指数对GMT的浸渍过程及界面形成过程有着重要的影响。

The melt index control of polypropylene in batch type liquid phase bulk polypropylene equipment has long been a concern of petroleum refiners.

针对间歇式液相小本体聚丙烯装置的生产特点 ,根据生产实际经验 ,对如何控制聚丙烯粉料熔体指数进行分析 ,总结出一些有效的控制措施。

In this paper, the melt flow indexes of six brands of high density polyethylene (HDPE) were measured by a full-load melt flow measuring instrument.

本文采用全负荷熔体流动速率测试仪测定六种牌号高密度聚乙烯（ＨＤＰＥ）的熔融指数，并参照高分子流变学的研究方法，初步尝试由所加载荷及熔融指数经过数据换算和处理，得到表征熔体流变性的三个重要参数：剪切应力、剪切速率和表观粘度。

The density and melt flow index of the composites with different carbon black content were measured.

利用旋转流变仪对复合材料的流变特性进行了考察,对不同炭黑含量的复合材料进行了密度和熔融指数测试。

Melt Index Prediction Based on Particle Swarm Optimization

基于粒子群优化算法的熔融指数预报

Soft Sensor for Polypropylene Melt Index Based on Adaptive Kernel Partial Least Squares

基于AKPLS方法的聚丙烯熔融指数软测量

Prediction of Melt Index Based on Wavelet and LS-SVM

基于小波-最小二乘支持向量机的熔融指数预测

Research of Melt Index Prediction of Polypropylene Based on Wavelet Neural Networks

基于小波神经网络的聚丙烯熔融指数预测研究

Study of Modelling for Gas-Phase Propylene Polymerization and Soft Sensing of Melt Index;

气相丙烯聚合反应器建模及熔融指数软测量的研究

A New Method of Melt Index Prediction of Propylene Polymerization Based on Improved ant Colony Optimization

基于改进蚁群优化算法的聚丙烯熔融指数预报新方法

Soft sensor method for polypropylene melt index based on FP-EFCM

基于机制建模与模糊建模相结合的聚丙烯熔融指数软测量方法

Production of high-MI polypropylene by using donor triethoxyisobutylsilane

异丁基三乙氧基硅烷作为外给电子体生产高熔融指数聚丙烯

Melt Index Prediction by BP Neural Networks Based on Canonical Correlation Analysis and Data Auto-regression

基于典型相关分析和数据自回归处理的BP神经网络在聚丙烯熔融指数预报中的应用

Numerical Simulation on the Swirl-flow Melting Furnace in MSW Gasification and Melting System;

城市垃圾气化熔融系统中旋风熔融炉的数值模拟

Numerical Simulation of Gas Flow Field in the COREX Smelter-Gasifier

COREX熔融气化炉内气流分布数值模拟

Numerical Analysis of Flowing for High Polymer in Spinning Pack and Optimization the Structural of It;

熔融纺丝组件熔体流动数值分析及其结构设计优化研究

capable of being melted and fused.

可以被熔化或熔融的。

Research on the Abrasion Liability of Ash in CFB Boilers and Numerical Simulation of Molten Incinerator;

CFB锅炉灰磨损特性研究及熔融炉数值模拟

Numerical Simulation Heat and Mass Transfer in a Molten Carbonate Fuel Cell;

熔融碳酸盐燃料电池单体传热传质数值模拟

The Numerical Simulation for Temperature Field of MCFC Stack;

熔融碳酸盐燃料电池堆温度场的数值模拟

Mathematic Simulation of Iron-bath Smelting Reduction Furnace with Side Lance

铁浴式熔融还原炉侧吹的数学模拟研究

The Molecular Simulation Study of the Low Surfaces Thermodynamic Melting of Refractory Metals (V,Nb,W);

难熔金属（V、Nb、W）低指数表面熔化的分子动力学模拟研究