spinneret

Numerical control positioning system for machining spinneret microhole based on image technique;

基于图像技术数控定位加工喷丝头微孔

Fabrication of profiled microfiber spinneret based on UV-LIGA technology

基于UV-LIGA技术的微孔异形喷丝头制备

The effect of voltage,distance from spinneret to collecting screen(C-SD) and concentration of polycaprolactam-formic acid solution on the configuration of the fiber was analyzed,and the relationship between the above electro-spinning parameters and the diameter distribution of the spun fiber was investigated.

采用静电纺丝的方法纺制了锦纶6纳米级纤维,分析了锦纶6甲酸溶液质量分数、喷丝头与接收屏之间的距离(C-SD)和电压对纤维形态结构的影响,讨论了上述参数和静电纺锦纶6纤维直径分布之间的关系。

To improve the quality of Ta Spinnerets with high hardness and alkali-proof corrosion,HFCVD is used to deposit crystalline diamond films with different sizes of grain on carbonized Ta spinnerets.

为改善钽喷丝头的品质,提高其硬度和耐碱腐蚀能力,利用热丝CVD制备不同粒径的金刚石薄膜,并通过对钽衬底的碳化处理,成功使之沉积于纯钽喷丝头表面,对纯钽喷丝头进行表面强化。

Transport jet of the filter shape equipment(KDF2)is a important and crucial technology part.

送丝喷头是滤棒成型设备(KDF2)上重要工艺中的关键部组件,其结构设计、制造精度和外围配置等都会影响其性能,容易造成滤棒的吸阻发生较大波动。

Effect of length-diameter ratio on properties of as-spun PANCF

喷丝头长径比对PANCF原丝性能的影响

The size of the filament is also controlled by varying the rate at which the filaments are pulled away from the hole by the godet wheel.

长丝的直径还与导丝盘从喷丝头孔引离长丝时的速度有关。

Usually the number of holes in the spinneret determines the number of filament in the yarn.

一般喷丝头细孔的数量决定了纱中长丝的根数。

Fabrication of profiled microfiber spinneret based on UV-LIGA technology

基于UV-LIGA技术的微孔异形喷丝头制备

The Effects of New-style Spinneret on Spinning Process and Properties of PAN-based Carbon Fiber Precusor

新型喷丝头对PAN基碳纤维用原丝纺丝工艺及纤维性能影响的研究

Application of Refrigerated Spinnerets in Acetate Fiber Production

喷丝头冷藏技术在醋酸纤维生产中的应用研究

The solution is filtered and pumped through the fine holes of a spinneret.

纺丝液经过滤后,借助于泵的压力穿过喷丝头的细孔。

The molten glass flows through orifices and temperature resistant bushings at the base of each furnace.

熔融的玻璃液流过喷丝头以及熔炉底部的耐高温衬套,

The size of the filament depends on the rate of flow through the hole of the spinneret rather than on the size of the hole.

所制成长丝的直径取决于粘胶的喷丝头孔中的流速,而不取决于孔径的大

There are basically three components in experimental installation of a high voltage supplier, a capillary tube with a pipette or needle of small diameter and a metal collecting screen.

电纺丝技术的基本装置由高压直流电源、带有细小喷丝头的样品管和收集板三部分组成。

Any of several synthetic textile fibers produced by forcing a cellulose solution through fine spinnerets and solidifying the resulting filaments.

人造丝，人造纤维一种人造纺织纤维，将原制纤维胶体强行穿过喷丝头，使生产出来的细丝得到加固

Sand-blasting nozzles, drawing nibs for high strength steel wire, lathe cutting tools, saw tips.

适合于喷沙嘴、适合高强钢绞线的拔丝夹头、车刀、锯齿。

reverse spray sprinkler

倒向喷雾式洒水喷头

Nylon is meltspun. That is to say a molten mass of nylon, formed by melting nylon chips, is forced through holes in a spinneret.

尼龙是采用熔纺工艺制成的,即将由熔化的尼龙切片构成的尼龙熔融体,强制通过喷头的纺丝孔,

sprayer or sprinkler head for spraying machines and mechanical appliances

喷雾机器及机械器具的喷雾头或喷水头

sunk screw

【机】埋[沉]头螺丝

Variable Rate Watering and Contour Controlled Precision Sprinkler and Sprinkler Irrigation;

变量喷洒可控域精确灌溉喷头及喷灌技术研究

THE MEASUREMENT AND CLASSIFICATION ON DRIFT PROPERTY OF SPINNING DISK SPRAYERS

转子式喷头喷雾飘移性能试验和分级