roll eccentricity

Experimental study of the behaviear of reinforced concrete members with steel fiber and bars under eccentric tension;

钢筋钢纤维混凝土偏心受拉构件受力变形性能的试验研究

This paper introduces simplified commonly used calculation methods to design common bolts connection under bending moment and eccentric tension.

介绍了目前常用于设计弯矩和偏心受拉普通螺栓群连接的简化计算方法,指出了其不足之处,然后推导了其更为精确的计算方法,对弯矩和偏心受拉的普通螺栓群连接设计提出了合理建议。

That is,the ligament section is simplified as eccentric tension model,and the tensile strength of f.

利用这点逆推混凝土的抗拉强度,即将韧带截面简化为偏心受拉模型,由最大荷载计算得到纤维混凝土的抗拉强度。

As to the problems such as length variation from blending products resulting in improper gripping due to poor distribution of fiber,introduction is made to a new technology of auto adjustment of the center distance of the rollers based on the length variation on the drawing frame for special production.

针对棉涤等混纺产品存在纤维长度差异,使棉条中纤维分布不匀,引起罗拉钳口控制不当,造成牵伸不匀的问题,介绍了棉纺并条机上按照纤维长度的变化对罗拉中心距进行自动调节的新技术,以适应特殊纤维的需要;调节机构包括快速傅里叶转换器、转换超限定频率宽度的信息及应用逻辑原理的判断、对螺杆的动作发出指令的机构,且每个控制动作的循环迅速;并条机上的中、后罗拉由电子控制的步进电机传动;代替了齿轮传动;在线罗拉隔距的调节可以减少牵伸不匀的产生,减少纺纱质量的波动。

The analysis of eccentricity ratio on the steel tube concrete column;

钢管混凝土柱偏心率影响分析

Based upon experiment calculation and discussion are made from two aspects: fixed pressure ratio and eccentricity ratio,at the same time resolving measures are proposed for optimum design of eccentrically compressed members,which has significant meanings for torsion-resistant design of RC eccentrically compressed members.

对钢筋混凝土偏压构件的抗扭特性进行了分析,通过实验从固定压力比和固定偏心率两个角度进行了计算和论述,提出了偏压扭构件优化设计的解决方法,对于钢筋混凝土偏压构件的抗扭设计具有十分重要的意义。

When the model of the engine considered the gas pressure as load, the applied load,eccentricity ratio and friction loss of t.

首先建立了考虑气压影响的单缸发动机模型,然后通过实验测得发动机在不同环境气压下气缸内的燃气压力,将此压力作为载荷加载到单缸发动机模型上,利用AVL公司提供的商用软件EXCITEDesigner计算得出主轴承和连杆大端轴承的载荷、偏心率和摩擦功率损失。

DISCUSSION ON CRACK CONTROL OF ECCENTRICALLY TENSIONED PRESTRESSED MEMBERS

预应力偏心受拉构件裂缝控制方法的探讨

Bottom rollers eccentric and vibrating, and lapping on rollers.

下罗拉偏心和振动、罗拉间搭接不良。

Wrong settings, improper roller coverings, eccentric top and bottom rollers.

工艺错误、辊（罗拉）合适、罗拉和下罗拉偏心。

Calculating the eccentric compressive bearing capacity of the rapid wall by the method of appendant eccentricity

附加偏心距法求解速成墙板偏心受压承载力

Test Analysis and Strut-and-Tie Method of the Beam-Wider-than-Wall Eccentric Joint;

钢筋混凝土宽梁—薄墙肢偏心节点受力性能研究和拉—压杆模型法设计

The referee was accused of being partial (towards the home team).

裁判受指责（对本地队）偏心.

The Stability Calculation of Slight Sections Column Pressed by Single-direction Eccentric Force;

窄截面柱单向偏心受压时的稳定计算

EXPERIMENT RESEARCH ON THE FRP BOLT UNDER ECCENTRIC LOAD

玻璃钢锚杆受偏心载荷作用试验研究

Experimental study on eccentric compression behaviour of autoclaved flyash-lime brick masonry

蒸压粉煤灰砖砌体偏心受压性能试验

Influence Analysis on Anchorage and Bearing Offsets of Curved Cable-Stayed Bridge

曲线斜拉桥锚固点与支座偏移受力影响

Reliability analysis of RC members subjected to eccentric compression based on random characteristics of eccentricity

基于偏心距随机特性的混凝土偏心受压构件可靠度分析

Our teacher is unpopular with most of the students because he plays favorites.

我们老师不受大多数同学的欢迎，因为他偏心眼。

He determined to be swayed by no prejudices.

他下决心独立思考，不受任何偏见的支配。

Experimental Research on the Behavior of Reinforce Concrete Special-shaped Column with Different Length of Limbs under Axial Compression and Biaxial Bending;

钢筋混凝土不等肢异形柱偏心受压试验研究

Experimental Study on Buckling Capacity of Slender Steel Reinforced Concrete Columns Subjected to Eccentric Load;

偏心受压钢骨混凝土长柱稳定承载力试验研究

Experimental Research on the Carrying Capacity of Corroded R.C. Columns;

锈蚀钢筋混凝土偏心受压柱承载力试验研究

The Experimental Study on the Capacity for Reinforced Concrete Masonry Columns Subjected to Eccentric Load;

配筋砌块砌体柱偏心受压承载力的试验研究

Experiment Study on Reinforced Masonry Walls under out of Plane Eccentric Load;

配筋砌体墙片出平面偏心受压试验研究