bomb

In this paper a multiple necking upsetting technological method was advanced according to the special shape and the dimensions of the high pressure gas bottle through the technological analysis and the experiments many and many a time,and the key technical problems of the practical production were solved.

根据高压气瓶的特殊形状及尺寸 ,通过塑性工艺分析及许多次工艺试验 ,文中提出了一种多次缩口顶镦工艺方法 ,从而解决了实际生产的关键技术问题。

In this paper,the technical inspection items and the evaluation criteria of 40MPa high pressure vessel are concluded,and the technique and loading process of acoustic emission detection are especially introduced.

对40MPa高压气瓶的技术检验项目和评定标准进行了小结,重点介绍了声发射检测的方法和加载程序。

This paper studies the design,process and test of aramid filament wound thin wall high pressure vessel with aluminum liner.

本文对薄壁铝内衬芳纶纤维缠绕复合材料高压气瓶的设计、工艺制作、试验进行了研究 ,针对芳纶复合材料低层间剪切强度、易吸潮及高温条件下强度损失大的特点 ,研究一种高层间剪切强度、耐高温的树脂体系 ,并对该树脂体系的工艺进行研究 ,并进行了大量的试验验证 ,从而得出芳纶纤维缠绕金属内衬复合材料高压气瓶的设计方法和工艺制作方法。

Propellant tank and high pressure vessel are important component of satellite prolusion system.

推进剂贮箱、高压气瓶(简称贮箱、气瓶)是卫星推进分系统的重要核心部件。

In particular, the stress conditions were tracked throughout the process of fabrication of the high pressure gas cylinder by X-ray diffraction.

用X射线及磁记忆两种方法对压缩天然气的高压气瓶应力状态进行了系统分析,对一个气瓶整体制造工艺中的残余应力变化用X射线法进行了跟踪检测。

In the high-pressure system both oxygen and acetylene are used from high-pressure cylinders.

在高压法中，氧气和乙炔都取用于高压瓶。

In the cylinders, the gas under pressure exists as a liquid.

在钢瓶内,高压下的二氧化碳是液态的。

Design and Simulation of 40MPa High Pressure Gas Bottle Made of TC4;

40MPa钛合金高压气瓶的设计及仿真

ANALYSIS ON EXPLOSION CASE OF A HIGH-PRESSURE GAS BOTTLE MADE OF 37Mn STEEL FOR EXTINGUISHER

37Mn高压消防气瓶爆炸原因分析及对策

The regulators are mainly used in Oxygen, Acetylene, Hydrogen etc. gases decompression. It has the double一 function of reducing steading the gas pressure.

主要用于氧气、炔、气等高压气瓶的减压装置，有降压和稳压两种作用。

NF3 is available in seven types of high-pressure containers including cylinders, Y cylinders, and tube trailers.

可以在七种类型高压容器，包括钢瓶、Y钢瓶和管道拖车中得到NF3。

Most cylinders are designed to vent contents when exposed to elevated temperatures.

大多数钢瓶设计了温度升高时的泄压装置。

Design on Salary System for the Sales Department in Dongji Company;

东基集团高压气瓶厂销售人员薪酬体系设计

Study of Electron Beam Welding Process for High-pressure Sphere Tank of TC4 Titanium Alloy

TC4钛合金球形高压气瓶赤道缝电子束焊接研究

Structural design and weaving of preformed fabric for manufacturing composite high-pressure cylinder for gases

复合材料高压气瓶用预成型织物的设计与织造

EXPERIMENTAL AND SIMULATION STUDY ON BONFIRE TEST OF HIGH-PRESSURE HYDROGEN STORAGE VESSELS

纤维缠绕高压氢气瓶火烧温升试验及数值研究

Recognition of Porcelain Bottle Crack Based on GA-RBF and Moment Invariants

基于GA-RBF和不变矩的高压瓷瓶裂缝识别

Typically hydrogen is stored in pressure tanks as a highly compressed gas at ambient temperature.

常温下，氢气通常以高度压缩气体的形式，贮存于压力瓶中。

low pressure cylinder regulator

低压石油气瓶调压器

The regulators are mainly used in Oxygen， Acetylene， Hydrogen etc. gases decompression.It has the double 一 function of reducing steading the gas pressure.

主要用于氧气、乙炔、氢气等高压气瓶的减压装置，有降压和稳压两种作用。

2 High pressure gas cylinders are made of steel, aluminium alloys or composite materials. Cylinder valves need be permanently protected with a removable or permanent (open) cap.

高压气瓶是由钢制，铝合金，或复合材料制成的，瓶阀必须用活动的或不活动的防护帽保护。

Take the following precautions to prevent injuries caused by the improper handling of compressed gas cylinders.

提高如下警惕，以防止错误操作压缩气体钢瓶造成的伤害。

Argon is shipped and stored in high-pressure cylinders, tubes, or tube trailers depending upon the quantity required by the user.

根据用户要求的量，使用高压钢瓶、管道或管道拖车来运输和储存氩。