steel traveler

Study on cone ring and traveller by high speed photography metod;

锥面钢领钢丝圈的高速摄影研究

Introduction is done to the traveller product displayed in the 10th CITME.

介绍了第十届中国国际纺织机械展览会上展出的钢丝圈产品,分析了国内外的差距,指出国内钢丝圈新品开发应集中考虑材质、热处理工艺和表面处理技术。

Looking back the traveller manufacturing and development in China from the view of strypped-down,invention,overtaking and innovation finds that traveller development in China should be in such a way that corpoation is needed with the consideration of material,heat treatment and surface treatment in consideration of shape,section and surface treatment process.

从仿制、初创、赶超、创新4个阶段回顾了我国钢丝圈的开发、研制历史,通过对钢丝圈圈型、截面及其表面处理技术发展的阐述,指出钢丝圈的研发仍应走协作道路,并以材质、热处理及表面处理作为重点。

Introduction is made to a device with new structure testing the friction force of rings plus travellers.

介绍了测试钢领、钢丝圈间摩擦力的一种装置,综述了钢领的表面处理新技术和新型钢领的结构,指出开发新型结构以代替传统的钢领、钢丝圈系统是实现环锭纺纱高速化的一个重要方向。

Brief introduction is made to the performance of rings and travellers on the ring frames,as well as the tek-requirement,usage and management of rings and travellers.

简述了环锭纺细纱机用钢领、钢丝圈的性能特点、技术要求,以及如何正确使用和管理钢领、钢丝圈。

Starting with the development of spinning process and the action upon the travellers,analysis is done to the current manu.

从纺纱技术的发展及对钢丝圈的要求入手 ,分析了当前我国普遍使用的环锭纺纱用钢丝圈制造业的规模、品种和技术现状及与国外先进水平的差距 ,提出应在深入研究环锭纺纱机理的基础上 ,不断开发钢丝圈用新材料、新设备、新工艺 ,优化其圈型 ,重视研究表面处理技术的发展策

Modeling and Simulation of Traveler Electromagnetic System;

磁悬浮钢丝圈的建模与仿真分析

As the key appropriative accessories in the ring spinning frame, ring/travelers and spindle perform the twist and wind of the yarn.

环锭纺纱工艺至今已有近180年的历史，尽管自20世纪50年代以来，出现了多种形式的新型纺纱方法，如转杯纺、喷气纺、摩擦纺、静电纺、涡流纺等，突破了钢领、钢丝圈的限制，大大提高了生产效率。

Using Practice of BC Ring and Ring Traveler;

BC型钢领与钢丝圈的使用实践

Research of Abrasion Resistance of Nickel Electroplating Ring Traveler;

镀镍钢丝圈耐磨性能的研究

Complement Usage and Management of Ring and Ring Traveler;

钢领钢丝圈的配套使用和管理

Quality control of bead wire production enterprise

胎圈钢丝生产企业中的质量控制

Influence of the range of elastic modulus on the determined elongation at rupture and yield strength ratio of bead wire

弹性模量设定对胎圈钢丝破断伸长率和屈强比测试结果的影响

Die repairing quality improvement of drawing die for bead wire

胎圈钢丝拉拔模具的修模质量改进

cycle tyre bead ring flipper

力车轮胎钢丝圈包布

Dynamic Analysis of Ring/Taveller System in Ring Spinning;

环锭纺纱钢领、钢丝圈系统的动态性能分析

The springs in seats and beds are made of coils of wire. The wire is springly and bends when pressed, but when the press is lifted.it springs back into position again.

座位和床上的弹簧是用钢丝圈制成，钢丝有弹性一压就弯，但是一没了压力，钢丝重新弹回去。

Theoretical and Experimental Research of Wear&Corrosion Resistance Films for Ring Traveler;

钢丝圈表面耐磨耐蚀涂层的理论与试验研究

Study on Clean Water-based Quenching/tempering Medium for Textile Steel Ring Travelers;

纺纱钢丝圈热处理清洁生产技术及工艺研究

Study on Oxide Scales Reduction of Ring-Travelers in Water-Based Quenching Process

纺织钢丝圈水基淬火减缓表面氧化的措施

EMTEX8 performances high ability to cling to the metal so that it will not be easily displaced from the steel-circle of textile machines.

EMTEX8 对金属机件有绝佳的黏附性，故不易由织机的钢丝圈中流失。

Round wire circlips

GB/T921-1986钢丝锁圈

nose ring for animals, of iron or steel wire

动物鼻圈,钢铁丝制

Roundwire snap rings for shaft

GB/T895.1-1986孔用钢丝挡圈

Development of HTΦ0.96mm tempered bead wire

HTΦ0.96mm回火胎圈钢丝的开发

Specifications for ring-Round wire snap rings

GB/T959.2-1986挡圈技术条件--钢丝挡圈

Trapezed steel wire for spring washer

GB/T5222-1985弹簧垫圈用梯形钢丝

Reason Analysis of Laying Fracture of Wire Rod C82DA for Steel Curtain

胎圈钢丝用盘条C82DA吐断问题原因分析

Development of diameter 1.55mm HT tempered bead wire

Φ1.55mm HT回火胎圈钢丝的研制

Research on the Drawing Technology of Tyre Bead Wires and Aperture Design of the Drawing Die

胎圈钢丝拉拔工艺和模具孔型设计研究

Electric control of production equipment for no joint wire rope bight

无接头钢丝绳绳圈生产设备的电气控制

Influence of finished product procedure process on tempered bead wire adhesion force

成品工序工艺对回火胎圈钢丝黏合力的影响