vacuum accessories

This article elaborated the "inductive jet" principle of air current and the application in draining water accumulated in the factory,explained the feasibility and practicability of using vacuum absorption as the power supply to drain water automatically in the enterprise.

从实际应用的角度出发,阐述了气流“引射”原理及其在工厂排除积水中的应用,说明了利用真空吸附为动力源在企业中进行自动排水的可行性和实用性。

The redundant control theory was applied in the vacuum absorption system of wall cleaning robot,and its feasibility was analyzedt,hen a model was established.

将冗余控制理论应用于负压式壁面爬行机器人的真空吸附系统中,分析了冗余理论应用于真空吸附系统的可行性并建模,提出了提高其安全性的有效措施——双真空泵冗余系统。

The paper researched on the mass and heat transfer of vacuum pressure swing adsorption (VPSA), focusing on the vacuum desorption process which is a difficult point and often simplified as the inverse process of adsorption in the previous documents.

本文针对其中的真空变压吸附进行了研究,侧重于以往研究中常简化处理的难点——真空脱附阶段。

According to air flow control principle,by adoption of pneumatic line drive technology and vacuum suction technology,pneumatic feeding mechanism was manufactured.

根据气压流体控制原理,采用气动直线驱动技术和真空吸附技术,研制出气动送料机。

In this paper,the biodegradable seeding containers from waste cotton linters and used paper were deve loped by making fibers in the linters/paper pulp adhere to the surface of a net mold under vacuum suction.

以废棉短绒和废纸为原料 ,采用真空吸附网模成型工艺 ,直接生产出可生物降解育苗钵。

A novel wall-climbing robot mechanism is presented based on planetary gear train movement and biped vacuum suction principle.

基于行星轮系运动及双足真空吸附原理,提出了一种新型爬壁机器人机构,介绍了机构的构型及结构特点,推导了运动学方程,分析了沿直线行走、平面旋转和跨越交叉壁面三种运动模式。

A new way to pick up tissue for bio-microdissection:vacuum adsorption;

适用于生物显微切割操作的真空吸附拾取组织新方法

Adsorption force calculation for vacuum adsorption of target Pellet;

靶球真空吸附装置中吸取力的计算

The design adopts the vacuum adsorption technique and in-wheel driving, and makes the cleaner adsorbed on the working surface and run smoothly, matches the clean machine of revolving brushes and single-chip microcomputer control system.

该设计采用真空吸附技术和轮式驱动方式,使清洁机能够在工作表面吸附并且能够平顺行走,配以旋转刷式清洗机构和单片机控制,可完成整个工作表面的清洁工作。

Using vacuum adsorb style fix up paper.

固定纸张方式采用真空吸附方式。

Design of a Vacuum Adsorption Dumping Gear for Flip Chip

真空吸附式倒装芯片翻转机械手设计

Finite Element Analysis and Structure Optimization for Vacuum Adsorption Clamp;

真空吸附夹具的有限元分析和优化设计

THE APPLICATION OF VACUUM ABSORPTION TECHNOLOGY ON FRP WIND POWER PRODUCTS

真空吸附技术在风力发电玻璃钢件上的应用

Influence on the Profile Accuracy in Diamond Turning of KDP Crystal in Vacuum Chuck

KDP晶体真空吸附方式对加工面形精度的影响

The Experimental Study of Redundancy Control in the Safety of Vacuum Absorption Wall Robot

冗余控制在真空吸附式壁面机器人安全性方面的实验研究

Research on Vacuum Gripper for Submillimeter Componets Operation;

面向亚毫米器件操作的真空吸附式作业工具的研制

Vacuum Pressure Swing Adsorption Oxygen Production System Used in Pulping Plant

真空变压吸附制氧系统在浆厂的应用

Probing into Problems of Vacuum Pump for PSA Regeneration

变压吸附脱碳再生真空泵问题的探讨

Experimental Investigation on H_2 Adsorption Performance of Composite Adsorbent in Vacuum Tank

真空储罐中复合吸附剂吸氢性能的试验研究

That attachment will convert your vacuum cleaner into a paint sprayer

那种附加装置将把你的真空吸尘器变成喷漆器。

The Performance of Solar Energy Adsorption Refrigeration Cooling System Using Evacuated Tubes Cooled by Water;

真空集热管—水冷型太阳能吸附制冷的性能研究

Problems in Vacuum Pump for PSA CO_2 Removal and Regeneration and Causes

变压吸附脱碳再生真空泵存在的问题及原因

Type selection and design of vacuum pump for PSA

变压吸附装置中真空泵的设计选型与计算

An Experimental and Stimulant Study of Pressure Drop in FCE Air Filter Adsorptive Material

FCE空气过滤吸附材料压降试验与仿真研究

Oxygen can be separated from nitrogen using Pressure/Vacuum Swing Adsorption (PSA/VSA) technology.

使用压力/真空旋转吸附（PSA/VSA）技术可以把氧和氮分离开。

In this paper the atmospheric absorbent fluidized freeze dryingis compared with vacuum freezedrying in many ways.

介绍了常压吸附流化冷冻干燥，并与真空冷冻干燥做了多方面比较。

The intracrystalline diffusivities of a same adsorbate on the catalysts were measured with a vacuum weight adsorption equipment.

采用真空重量法测定了同一吸附质在两者上的晶内扩散系数。