hot spark plug,hot-type plug

基本解释热型火花塞

网络释义

1)hot spark plug,hot-type plug,热型火花塞2)fever type,热型3)heated-mold continuous casting,热型连铸4)Heated mold continuous casting,热型连铸5)OCC,热型连铸6)Heated Mould Continuous Casting,热型连铸

用法和例句

Methods 202 FUO patients were chosen and their causes were categorized,the fever type and changes of fever process were observed by the curves of temperature changes.

目的分析不明原因发热(FUO)患者的病因,观察发热热型和热程变化,评价降温护理效果。

Cu-Sn alloy wires were prepared by the "heated-mold continuous casting+cold deformation+ recrystalliza- tion annealing + cold deformation" technics.

通过"热型连铸法+冷拔+再结晶退火+冷拔"工艺制备的Cu-0。

The contrast of heated-mold continuous casting of copper rod experiments on two different structural molds were carried out.

用两种结构铸型进行了热型连铸铜杆对比试验研究,结果表明,提高铸型温度梯度有利于稳定固液界面的位置,从而扩大热型连铸工艺参数配合的范围。

By approprizte process parameters,the Al-1%Si alloy wire with good surface quality and unidirectional dendritic crystal was fabricated on the self-made horizontal heated-mold continuous casting equipment.

在自制的水平热型连铸设备上,采用一定的工艺参数,制备出了表面呈镜面,内部组织沿轴向定向排列的柱状晶Al-1%Si线材,其与金属型生产的多晶线材相比,屈服强度提高40%,伸长率提高35。

Research in mechanical properties of heated mold continuous casting Cu-Al-Be super-elastic alloy wires;

热型连铸Cu-Al-Be超弹性合金丝机械性能的初步研究

The cold-working property of Cu-Al-Mn superelasticalloy cast by heated mold continuous casting;

热型连铸超弹性Cu-Al-Mn合金的冷加工性能

Effects of Ti addition on grain growth of Cu-Al-Ni alloy cast by heated mold continuous casting process;

Ti对热型连铸Cu-Al-Ni合金晶粒长大的阻碍作用

Numerical Simulation of Influence of Processing Parameters on the Position and Shape Features of Liquid-solid Interface in Ohno Continuous Casting (OCC);

热型连铸工艺参数对液固界面形状位置特性影响的仿真

Application of PLC in Temperature Control Systems of OCC;

PLC在热型连铸温度控制系统中的应用

The Mg-Al eutectic alloy wires with 5 mm diameter were manufactured successfully using Ohno Continuous Casting(OCC).

利用热型连铸法(OCC),成功拉制出φ5 mm的Mg-Al共晶合金线材。

3-D Simulation of Microstructure of Pure Cu in Heated Mould Continuous Casting;

纯铜热型连铸过程三维微观组织模拟

Numerical Simulation of Microstructure Formation during Solidification Process in Heated Mould Continuous Casting;

热型连铸凝固过程微观组织形成的数值模拟

By appropriate process parameters,the Ag-Cu-Zn alloy ingot with good surface quality and even unidirectional microstructure was fabricated on the self-designed horizontal heated mould continuous casting apparatus.

在自制的水平式热型连铸设备上,选用合适的工艺参数制备出了表面质量良好、内部组织沿轴向均匀分布的Ag-Cu-Zn合金铸棒。

最新行业英语

行业英语

单词索引:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
短语索引:
ABCDEFGHIJKLMNOPQRSTUVWXYZ

CopyRight © 2020-2024 在线英语词典[www.yycidian.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024103067号