ACEV A/C-Evaporate-Temperature

A refrigerating system for freezing fish products using two evaporating temperatures is discussed in detail by means of theoretical analysis, calculation and consideration of operating effects.

通过理论分析、计算和实际应用测定,全面阐述了用两种蒸发温度对鱼品进行速冻的制冷系统。

With a designed supercooled-water ice making system test-bed, carries out grouping experiments for different evaporating temperatures and water flow rates.

在自主开发的过冷水制冰试验台上,对不同蒸发温度和水流量下的运行情况进行了分组试验。

Some researches in an ice harvester machine are made which indicate that the evaporating temperature is the most significant factor which influence the COP (Coefficient of Performance) of a refrigeration compressor while both the evaporating temperature and the condensing temperature are two main factors.

通过对某冰片滑落式冰蓄冷空调系统运行的分析及研究,表明在影响制冷机COP值的两大因素——蒸发温度和冷凝温度中,蒸发温度占主导地位,要提高制冷机运行的COP值应当首先考虑提高制冷机的蒸发温度。

Analysis of influence of adjustment of expanding valve and variation in evaporation temperature on dehumidification efficiency;

除湿干燥机膨胀阀调节和蒸发温度变化对除湿效率的影响

Experiments on defrosting control based on exhaust fan current combined with evaporation temperature;

基于排风机电流和蒸发温度联合控制的除霜实验

The condensation temperature and evaporation temperature are variational in condensator and evaporator using R22/R142b non-azeotropic mixture refrigerant.

R2 2 /R14 2b非共沸混合制冷剂在冷凝器和蒸发器中其冷凝温度和蒸发温度是变化的。

Performance prediction of a direct evaporative cooling air conditioner using neural network method;

用人工神经网络方法预测分析直接蒸发冷却空调机的性能参数

The Effect of High Evaporation Temperature in Evaporator on Milk Powder Quality

蒸发器蒸发温度过高对奶粉质量的影响

THERMODYNAMIC ANALYSIS ON A THREE-STAGE REFRIGERATION SYSTEM WITH TWO EVAPORATING CIRCUITS USING R717

R717双蒸发温度三级混流制冷系统热力学分析

Variations of beth evaporating temperature and gas-cooler exit temperature have strong impacts on the EER of the system.

蒸发温度和气体冷却器出口温度两工况的变化对该系统性能的影响程度相对较大。

EVAPORATOR TEMPERATURE SENSOR CONNECTOR

蒸发器温度感知器接头

Water evaporates more and more quickly, as the temperature grows.

随着温度的升高，水蒸发得越来越快。

The parameters mean the evaporation capacity or the volume, pressure, and temperature.

介质参数是指蒸发量或容积、压力、温度。

(chemistry) evaporating readily at normal temperatures and pressures.

（化学）在正常的温度和压力下容易蒸发的。

A CALCULATION ON THE TEMPERATURE FIELD OF THE VAPORIZATION COOLING ELECTRODE USED IN HIGH POWER ELECTRON DEVICE

大功率电子器件蒸发冷却电极温度场的计算

A New Method for Calculating the Latent Heat of Evaporation of Alkane at 298K Using Topological Method from Molecular Structure;

应用拓扑方法计算烷烃298K温度下的蒸发潜热

Caloric Calculation of Monotype Evaporator and Margin Calculation of Diathermanous Average Temperature;

单效蒸发器的热量衡算与传热平均温度差计算

Assimilation of Land Surface Temperature in Evapotranspiration Model

作物蒸散发模型研究中的地表温度反演

Influence of substrate temperature on properties of ZnS films prepared by electron-beam evaporation

基片温度对电子束蒸发的ZnS薄膜性能的影响

steam standard time-temperature curve

蒸气标准时间-温度曲线

Low humidity, in warm to hot temperatures, will act to cause liquids to evaporate and dry more quickly.

湿度小的话，在温暖或高温下，会导致液体蒸发并且干得更快。

STUDY ON THE TEMPERATURE FIELD OF CPL CAPILLARY WICK EVAPORATOR USING ONE-DIMENSIONAL INVARIABLE TEMPERATURE PHASE CHANGE INTERFACE MODEL

用一维恒温相变界面模型研究毛细芯蒸发器温度场

thermostatic evaporator pressure regulator

恒温蒸发器压力调节器

The rate of evaporation depends on the material and such factors as the temperature, the surface area, amount of ventilation, and the pressure exerted on the surface.

蒸发速率取决于材料及诸如温度、发面积、风量和施加在此蒸发面上的压力等因素。

The rate of metal evaporation increases with increase of temperature under vacuum.

在一定的真空度下,金属的蒸发速率随着温度的升高而增大。