metal pattern molding

Mechanical Properties and Microstructure of Zn-50Al Alloy in Permanent Mold Casting;

金属型铸造ZA50合金的力学性能和组织

Large Aluminum Alloy Blade in Permanent Mold Casting;

大型铝合金叶片金属型铸造工艺分析

Analysis for Defects of Water Faucet Handle by Permanent Mold Casting;

金属型铸造水嘴手柄缺陷分析

Based on sufficient theoretical analysis and production practice validation, the metal mold casting process was summarized for cylindrical Al alloy shell-casting, which has high demand for inside and outside quality.

在理论分析和生产验证的基础上,对内外质量要求较高的圆柱类铝合金壳体铸件,采用金属型铸造的工艺方法,阐述了在浇冒系统、排气系统、浇注等方面的工艺思想,尤以扁平扇形横浇道和环形内浇道的搭配设计可更加有效地排渣和热量的分散,效果良好。

Gravity Die Casting for Heavy Aluminum Alloy Piston;

大型铝活塞的金属型铸造

Application of Squeeze on Permanent Mould Casting of Mg-Alloys;

挤压在镁合金金属型铸造中的应用

Study on the Effect of Iron for the Aluminum Alloy Piston in Permanent Mold;

金属型铸造活塞铝合金中铁的作用研究

Foundry Technique of Rotary Permanent Mold for the Aluminum Alloy Piston;

铝活塞翻转式金属型铸造工艺

After adding alloying elements of Cu,Cr,B and Nb into the Mn-Si spheroidal graphite iron,bainite ductile iron was produced by step quenching and a permanent molds process.

在Mn-Si球铁中加入Cu、Cr、B、Nb等合金元素,采用分级等温淬火工艺,用金属型铸造代替传统砂型铸造生产抗磨贝氏体球铁。

We can also adopt sand shell moulding or metal mold casting as for allotype castings.

对异形铸件，还可用砂型铸造或金属型铸造。

Moreover a factory also produces the metal mold casting, the centrifugal casting, the continuous casting and other casting and so on.

另外本厂还生产金属型铸造、心铸造、续铸造及其他铸造等。

Permanent Mold Casting Pb-4Sb Alloy

分面成形法金属型铸造Pb-4Sb合金

Solidification Behavior and As-cast Microstructure of Permanent Mould Casting Mg-10Zn-2Al alloy

金属型铸造Mg-10Zn-2Al合金的凝固行为及铸态组织

Research on Casting Process and Properties of Ductile Iron Castings Produced by Copper-based Alloy Mold;

球墨铸铁铜金属型铸造工艺和性能的研究

Process of Metal Mold Casting for S195 Nodular Cast Iron Camshaft Production

S195球铁凸轮轴金属型铸造工艺

Study on Heat Transfer Coefficients at Metal/Mold Interface during Solidification in Metal Castings

金属型铸造凝固过程铸件/铸型界面换热系数的研究

The Experimental Study of Hot-Working Steel for Producing Die Mould of Al Alloy Piston;

铝合金活塞金属型铸造热作模具钢的试验研究

Optimization of Permanent Casting Technology for Aluminum Alloy Large Sync Belt-Wheel;

铝合金大同步带轮金属型铸造工艺优化

Study on Rheological Characteristics of Permanent Mold Coating for Magnesium Alloys

镁合金金属型铸造涂料流变性能的研究

Effects of Pouring Process on Mechanical Properties of Permanent Mold Casting ZL114 Alloy

浇注工艺对金属型铸造ZL114合金力学性能的影响

Research of Early Failure Mechanism of Clad Metal Mould Chrome Grinding Ball;

复合金属型铸造铬系磨球早期失效机理的研究

Process Optimization and Numerical Simulation for Shock Absorber Sleeve in Permanent Mold Casting

减震器筒体金属型铸造过程模拟及工艺优化

ingot mould of metal for use in metal

金属铸造金属铸锭模

An Example of Recovery of Coated Die for Centrifugal Cast Small-Bore Pipes

涂料金属型离心铸造小口径管铸型再生一例

metallurgical or metal foundry moulding machine (excl. machines for moulding metal powder under pressure by sintering)

冶金或金属铸造用造型机（金属粉末烧结压力造型机除外）

Development and Application of Die Cast Hammer Made of Composite Metal

金属型复合铸造铸态锤头的研制及应用

Analysis And Application of Near Net Metal Shape Cast;

近终型金属铸造模具制造工艺设计分析与应用