pressur of laser light

Impact of NSR and atomization pressure on SNCR used in power plant boiler;

化学计量比、雾化压力对电站锅炉SNCR脱硝的影响

The relationship model of static head in tundish,atomization pressure on the tip of nozzle and the mass median droplet diameter was established.

本文建立了静压头、雾化压力与雾化熔滴尺寸的模型关系。

The different parameters in this process(atomization pressure and deposition distance) were employed to study the influences for the microstructures of the alloys.

用喷射铸造法制备了CuCr25触头合金,研究了工艺参数(雾化压力和沉积距离)对合金组织形 态和性能的影响。

The characteristics and advantages of press-spraying and granulate drying technique used in the production of basic chromium sulfate are described.

通过济南裕兴皮革化工有限责任公司原气流喷雾干燥机与新型压力喷雾干燥机的比较 ,阐述了压力喷雾造粒干燥技术的碱式硫酸铬干燥中的特点和优点 ,并通过对运行数据以及实验测定数据的整理分析 ,总结出了优化的运行参

And the movement and temperature of metal granules under different atomizing pressure and with different granule diameters were investigated.

采用CFD软件对喷射成形工艺过程雾化室内金属颗粒的行为进行了模拟,研究了不同雾化压力下、不同粒径的金属颗粒运动轨迹及温度变化情况。

The trial analyzed the weed control effect of different situation including the sprayer pressure,the nozzle style and herbicide concentration through adjusting these factors,discussed the factors affecting the quality of spraying.

通过对喷雾器压力、喷嘴型号和药剂浓度的调节,对不同喷雾压力、不同喷嘴型号和不同药剂浓度下的除草效果进行调查分析,探讨影响喷雾质量的因素。

Experimental Investigation and Statistical Analysis of the Pressur Atomizing Nozzle on a Heavy Gas Turbine

某重型燃气轮机压力雾化喷嘴性能试验研究及统计分析

Characteristics and comparison of pressure-based variable spray

基于压力变量喷雾的雾化特性及其比较

Effect of Air Pressures on Mist Characteristics of Oil Mist Lubrication Device

空气压力对油雾发生器雾化特性的影响

The Theoretical and Experimental Research of the Effect of Atomizing Angle on Pressure Type Liquid Atomization;

雾化角对压力式液体雾化效果影响的理论及实验研究

Experimental Research on Atomization Characteristics of Pressure Nozzle and Numerical Simulation on Heat and Mass Transfer in Spray-Dryer;

压力式喷嘴雾化特性实验研究及喷雾干燥热质传递特性数值模拟

The atomizing nitrogen pressure is the key factor of influencing the super-tiny spherical aluminum powder rate in aluminum powder atomization process.

铝粉雾化生产过程中,雾化氮气压力是保障雾化铝粉的成型率和细粉率的关键参数。

Relation between Variabcle Law of Pressure and Concentration of the Propellant in Aerosol Can

喷雾罐内推进剂压力及浓度变化的探讨

Pressure Analysis and Structure Optimization for Outlet Pipe of Exhaust Fan

抽雾风机出口管道的压力分析及结构优化

Measure Methods of Spray Distribution in Radial Direction of Pressure Atomization Nozzle

压力式雾化喷嘴径向喷淋密度的测量方法

Analysis of Calculation Model for Spray Characteristics of Pressure Swirl Nozzles

压力涡流喷嘴雾化特性模拟的双相流模型分析

knapsack sprayer with pressurized cylinder

背负式压力筒喷雾器

The Effect of Asphalt Concrete Stirring Equipment Atomizer and Oil Pressure on the Burner Technology

沥青混凝土拌和设备雾化器、供油压力对燃烧器技术性能的影响

Experimental Research on the Atomization Characteristics of Air-blast Spray Nozzles for Selective Non-catalytic Reduction System;

SNCR气力式雾化喷嘴雾化特性的实验研究

Study on Microstructure of T10 Steel Powders by High Pressure Gas Atomization

高压气雾化T10钢粉末微观组织的研究

A Theoretical Analysis of Oil Atomization and High-voltage Electrostatic Field in the New Atomization Device of Electrostatic Oiler

静电涂油机中新型雾化装置下的油液雾化及高压静电场分析

Analysis of Piezoelectric-solid-liquid Coupling Characteristics of Micro Nebulizer

压电致动微雾化器的压电-固-液耦合特性分析

Effect of Ambient Pressure on Droplet's Spray Process in Colloid Thruster

环境压力对胶体推力器喷雾过程的影响

Three Dimensional Numerical Simulation on Single Atomizer Blend Flow Pressure Spray Dryer;

单喷嘴混流压力式喷雾干燥塔三维数值模拟