unblocking

Product disassembly model based on polychromatic sets theory;

一种基于多色集理论的产品拆卸模型研究

Based on the indoor stress path test on soft clay, a new formula in reference to horizontal resistance factor is derived It involves unloading modulus data in increment FEM and proves to be valuable to the design of multi step excavating and supporting proces

根据软土的室内应力路径与软土的卸荷模量的关系试验研究 ,推导了适用于增量有限元双弹簧模型地基弹簧系数的公式 ,对基坑分步开挖及支护结构设计计算、软土隧道施工等岩土工程问题有较大的实用价值 。

It is shown by the results of stress path tests in soft clay that the unloading modulus of soft clay is highly stress path dependent.

软土的室内应力路径试验研究表明，软土的卸荷模量不仅取决于土的物理性质，而且还和所经历的应力路径密切相关。

An elasto-plastic large deformation dynamic semi-explicit algorithm based on the iteration of velocity is proposed, and the U-bending and S-rail spring-back are simulated with die-unloading manner by adopting quasi-bending membrane element.

提出了基于速度迭代的弹塑性大变形动力半显式算法 ,并且在此基础上采用拟弯曲膜单元 ,结合有模卸载方式数值模拟了U形弯曲以及S形导轨回弹过程 ,着重比较了动力半显式算法与动力显式算法和实验的回弹结果 。

It cannot be used to determine the damage characteristics of elastoplastic materials by replacing the elastic modulus after damaged with the relaxed modulus.

指出该方法只适用于间接描述弹（脆）性材料损伤行为，不能简单地用受荷过程中的“卸载模量”代替假说中的“受损弹性模量”来描述具有不可逆塑性变形特征的弹塑性损伤行为，否则将可能导致对损伤行为的误判。

Research on disassembly model and disassembly sequence planning based on modularization

基于模块化的拆卸模型及拆卸序列规划研究

Based on analyzing feature of the existed disassembly models, disassembly and recycling model based on“ Hybrid Graph” is proposed.

在分析现存拆卸模型的基础上,提出基于“混和图”的产品拆卸回收分析模型。

Module Unload: %s.

模块卸载: %s.

Door Module Remove/Install

车门模组拆卸/安装

Remove the door module from the trim panel.

从饰板上拆卸车门模组。

Structure Optimization and Process Simulation of Chain Unloader

链式卸船机结构优化及卸料过程的模拟

This paper studied the disassembling sieve in disassembly graph model systemically.

系统地研究了构造拆卸图模型过程中的可拆卸性筛子。

Disassembling sieve based-on polychromatic sets has the advantages of higher formalization level and easily programming.

该研究结果保证了拆卸图模型和拆卸过程规划结果的正确性。

DISCONNECT THE SEAT BELT CONTROL MODULE.

拆卸座位安全带控制模组。＊＊

Push Button Module Remove/Install

按压按钮模组的拆卸/安装

Product information model for disassembly and recycling is developed.

建立面向拆卸回收的产品信息模型。

The molds can be changed according to the suitable insole size.

模具装卸方便，以利各种尺寸中底定型。

Numerical Simulation of Rock Mass Unloading Damage and Its Engineering Application;

岩体卸荷损伤数值模拟及其工程应用

Stochastic Network Model for Disassembly of Discarded Products;

装配式产品拆卸的随机网络模型研究

Failure characteristics and constitutive model of rock under unloading condition

岩石卸荷破坏的变形特征及本构模型

A Product Selective Disassembly Model Based on Hybrid Directed Graph

面向目标拆卸的产品复合有向图建模

The model analysis of motorized wheel dump truck based on ANSYS

ANSYS的电动矿用自卸车有限元模态分析

An Analysis on the Container Handling Technology Models in the Middle and Small Container Terminals

中小型集装箱码头装卸工艺模式分析