slope predication

Slope and Intercept Calculating with Excel in Calibration of Infrared Moisture Meter;

利用Excel计算红外水分仪校准过程中的斜率和截距

Optics-mechanics analysis method about the coupled fringe pattern of off-plane displacement and slope in shadow moiré;

影栅云纹法中的离面位移与斜率耦合条纹的光力学分析

Principle and application of linear interpolation with slope value accumulation;

斜率累积直线插补原理及其应用

The steady polarizationg curves and Tafel slope of the coatings in 60% of H2SO4 solution were measured by CHI660B electrochemical workstation,and the microstructure before and after corrosion was analysed by metallographic microscope and X-ray.

利用超音速电弧喷涂设备在钢板表面分别喷涂Al、Zn、316不锈钢(0CrNi12Mo2)和ERNiCu-7四种涂层,采用CHI660B电化学工作站测试四种材料在60%H2SO4溶液中的稳态极化曲线和Tafel斜率,并利用金相显微镜和X射线衍射等方法进行腐蚀前后的组织分析。

Using electrochemical workstation,the steady polarizationg curves and Tafel slope of supersonic arc spray coating Al,Zn and 316 non-corrosive steel were measured in H2SO4 solution of 60 percent.

利用超音速电弧喷涂设备在钢板基体表面分别喷涂Al,Zn和316不锈钢(0crNi12Mo2)3种涂层后,通过采用CHI660B电化学工作站,测试3种材料在60%H2SO4溶液中的稳态极化曲线和Tafel斜率,并利用金相显微镜进行腐蚀前后的组织分析。

The results were indicated as follows:Tafel slope was 0.

结果表明,镍阴极电沉积的Tafel斜率为0。

Based on the method of equilibrium curvature, built-up rate of h.

分析了不同井眼曲率和不同弯角下120mm大角度单弯螺杆钻具组合应力分布情况,最大等效应力随着曲率的增加先减小后增大,随着弯角的增大而增大;采用平衡曲率法,对大角度单弯螺杆造斜率进行了计算。

To meet the demand of higher built-up rate,single-bending screw drill tool with large angle is used during the drilling of the moderate-and short-radius horizontal well.

钻中短半径水平井,在采用弯角较大的单弯螺杆钻具以满足高造斜率的需要时,由于套管内径较小,螺杆钻具钻头处位移比较大,螺杆钻具能否顺利通过直井段是钻中短半径水平井面临的一个重要问题。

The average slope is used to calculate α(k) instead of constant 0.

采用平均斜率的概念计算α(k)序列,并利用MATLAB编程实现数据处理。

Then the average slope method is used to improve the background value of grey model,and the original surveying data sequential can be transformed to.

将指数平滑技术引入到灰色预测模型中,该方法既充分利用了观测序列中的有用信息,又大大减少其随机性,将平均斜率法对灰色模型的背景值计算方法进行了改进,将原始观测数据序列变换成规律性强的呈指数变化的序列。

The average slope is used to calculate instead of constant 0.

文中通过采用平均斜率的概念计算a(k)序列,并利用MATLAB编程实现数据处理。

Crystal grain size along the normal direction of the (110), is one of the important factors affecting the slope factor.

合金(110)面法线方向上晶粒尺度的大小是影响合金放氢平台斜率系数的因素之一。