multi-countershaft transmission

Fracture failure of the intermediate axis in the passenger car gearbox was analyzed by SEM and traditional examination method.

采用扫描电镜和常规检验方法,对客车变速器中间轴的断裂原因进行了分析。

"The overdrive is a mechanism interposed between the transmission and propeller shaft to permit the propeller shaft to turn faster than, or overdrive, the transmission main shaft."

超速档是装在变速箱和传动轴之间的一套机械装置,使传动轴比变速器主轴转的更快。

Remove the floor console from the floor pan transmission tunnel.

从底板变速器-传动轴盖板中拆去底板支柱。

The Application of the Convertible Frequency Governor of Alternating Current to the Reform of the Mainshaft Drive System of a Large_size Vertical Lathe

变频调速器在改造车床主轴拖动系统中的应用

"This changes the angle of drive and the distance between the transmission and the differential, and the propeller shaft may take care of these two changes."

使变速器和差速器之间的传动角度和距离发生变化。传动轴要能适应这些变化。

The transmission is then moved toward the rear until the main gear shaft clears the clutch disk. It can then be lowered to the floor.

然后,把变速器主传动轴的端部从离合器中抽出,可将其放到地面上。

Introducing the calculation of decelerator axle-system each grade axial clearances and its theoretical basis.

减速器轴系行级轴向间隙的计算及其理论依据。

"Seals are necessary when a shaft extends from a housing (enclosure) containing oil, such as a pump or a gearbox."

当一根轴从内中有油的机壳(如泵或变速器)中伸出时,就需要密封。

"Rotary motion of the transmission main shaft carries through the propeller shaft to the differential, causing the rear wheels to rotate."

变速器主轴的旋转运动通过传动轴传递到差速器上,使后车轮转动。

"In automatic transmissions, the varying ratios between the engine crankshaft and the wheels are achieved by automatic means."

在自动变速器中,发动机曲轴和车轮问不同的传动比是自动调节的。

engine and transmission alignment checking device

发动机和变速器轴线检查仪

Software Development and Mechanics Analysis of Transmission Bearing

汽车变速器轴承受力分析与软件开发

differential drive shaft coupling

差速器传动轴联轴节

Analysis Research Disassembles Which Based on VB.NET Reduction Gear Middle Axle

基于VB.NET减速器中轴拆装的分析研究

How to Design Two Shaft Gear Reducer in Structure Rapidly;

如何快速设计二级齿轮减速器中转轴的结构

Process Analysis and Designing for Hanging Pressure Production Line of Tractor Transmission Bearing;

拖拉机变速器轴承对压线设计及工艺分析

Transmission systems― conveys the drive to the wheels. The main components are clutch, gearbox, driveshaft, final drive, and differential.

传动系统-把动力运送到车轮。主要零部件是离合器，变速器，传动轴，主减速器，和差速器。

differential adjusting wrench

分速分速器轴承调整扳手;分速器轴承调整扳手