double-helical gear

Main causes and the analyses of the wrongly-connected axle of double-circular-arc herringbone gear reducer of beam pump;

抽油机双圆弧人字齿轮减速器串轴的主要原因与分析

Analysis on static and dynamic characteristics of herringbone gear in meshing;

人字齿轮啮合静-动态振动特性分析

Contacting element of tooth surface stress of herringbone gears;

人字齿轮齿面应力的接触元分析

Theoretical vibration pattern of herringbone gearing;

人字齿轮传动的振动理论分析模型

It is mainly research the chevron gear of ZY3NB-1300 drilling pump, and on the foundation of reference the advanced manufacture technique of home and abroad.

以ZY3NB-1300型钻井泵的人字齿轮为研究对象,在借鉴国内外先进制造技术的基础上,从齿轮加工机床、加工图样、刀具种类及应用范围、提高表面质量途径以及工装设计等方面进行了总体分析,确定了人字齿轮的加工难点及在Y31200B滚齿机上用指形齿轮铣刀铣齿的加工方案。

The text is mainly research the chevron gear of ZY3NB-1300 drilling pump, and on the foundation of reference the advanced manufacture technique of home and abroad , research the new process method of narrow relief groove chevron gear.

本文主要以ZY3NB-1300型钻井泵的人字齿轮为研究对象,在借鉴国内外的先进制造技术的基础上,研究窄退刀槽的人字齿轮的加工问题。

Secondly,the mathematic programming model for tooth contact of double helical gears was built with non-linear programming method,which was based on finite element flexibility matrix,and the particular restriction conditions of double helical gears were imported.

通过改变刀具切削刃的形状,以三段抛物线代替齿条的直线齿廓,推导出了刀具齿面方程;基于有限元柔度矩阵的非线性规划法,引入人字齿轮特有的约束条件,建立人字齿轮接触问题的数学规划模型,通过一种改进的正规形求解,从而获得人字齿轮的承载传动误差;利用光栅测量系统对修形前后试验齿轮副的传动误差进行了测量并与理论计算结果进行了对比验证。

Secondly,according to the meshing characteristics of double helical gears,coordinate system for double helical gears meshing was built,and furthermore,tooth contact analysis (TCA) of double helical gears was discussed based on that of helical gears.

其次,针对人字齿轮的啮合特点,建立了人字齿轮啮合的坐标关系,基于斜齿轮轮齿接触分析,提出了人字齿轮轮齿接触分析的方法。

double helical (spur) gear

双螺旋齿轮，人字齿轮

Calculation of Meshing Stiffness and Research on Tooth-Race Load Distribution for Herringbone Gear

人字齿轮啮合刚度计算与齿面载荷分布研究

A Model and Method for Load-bearing Contact Analysis of Herringbone Gears

人字齿轮承载接触分析的模型和方法

Abstract: This artical presents the principle and equipment for slotting large modulus gear with helical teeth and herringbone gear with narrow slot cutter groove.

文摘:介绍了在大型普通滚齿机上插削大模数斜齿轮和小空刀槽人字齿轮的原理与装置。

The New Process Method of Chevron Gear of ZY3NB-1300 Drilling Pump;

ZY3NB-1300型钻井泵人字齿轮的新型加工方法

Finite Element Analysis of Large-scale and Two-stage Marine Herringbone Gear Transmission;

大型船用二级人字齿轮传动有限元分析

Free Vibration Characterization Analysis of Encased Differential Herringbone Gear Train

封闭式人字齿轮行星传动的自由振动特性分析

Calculation of Transmission Error of Modification Double Helical Gears and Experimental Investigation

修形人字齿轮传动误差计算与试验研究

Virtual Assembly and Accurate Parameterized Modeling of Herringbone Gearing

人字齿轮的参数化精确建模方法与虚拟装配

Study of the Design and Manufacture of Multi-Link Press with Double Herringbone Gear Shaft;

多连杆压力机双人字齿轮轴设计及加工技术的研究

The Analysis of Great Rolling Mill's Herring-bone Gear Hurt and the Suggestion of Repairing;

大型轨梁轧机主传动人字齿轮损坏机理及防治措施的研究

Resesrch on Herringbone Gear of 1300 HP Mud Pump Based on Workbench

基于Workbench的1300HP型泥浆泵人字型齿轮研究

rack and pinion passenger hoist

齿轮齿条式载人吊重机

differential pinion cross

差速器小齿轮十字轴

Quadruple-arc Gear Design and Digital Processing

四圆弧齿廓齿轮的设计及数字化加工

Digital simulation of spiral bevel gears' real tooth surfaces based on non-uniform rational B-spline

基于NURBS的弧齿锥齿轮真实齿面的数字化仿真

straight-cut gear

直齿圆柱齿轮，正齿齿轮

burnishing of gear teeth

(齿轮的) 轮齿研磨