B-pillar

FEA Research on Cold Rolled Annealing Steel Plate Stamping Process for Automobile B-pillar

冷轧退火钢板冲压汽车B柱的有限元分析

Using AutoForm software to analyze and simulate the automobile B-pillar drawing process , and the dangerous forming areas was obtained.

利用AutoForm软件对某车型的中柱(B柱)的拉伸成形过程进行了仿真模拟,获得了成形的危险区域。

A side impact simulation on the B-pillar(a key energy-absorbing component in side impact) of a small car and its structural optimization by finite element analysis(FEA) are conducted with corresponding modifications on B-pillar structure performed.

应用计算机仿真技术对国产某小型轿车的侧面碰撞吸能部件B柱进行了碰撞仿真,并对其进行了有限元结构优化计算分析与研究。

Based on conceptual design method,the experiment test and the simulation of the automobile\'s side frame components\' general intrusion velocity curve and B pillar deformation mode,three simplification intrusion velocity curves which loaded to the specific position of the B pillars were extracted,and then the B pillar/dummy simplification model was established.

运用概念设计方法,通过参照实车和仿真中侧围部件的一般侵入速度曲线和B柱的变形模式,提取了对B柱特定部位进行加载的三条简化的侵入速度曲线,并建立了B柱/假人的简化计算模型。

Process analysis and drawing die design were conducted for B-pillar reinforced panel of DP600 vehicle and product structure modification and technology design were made to B-pillar reinforced panel based on the simulative analysis of forming process with a data simulation software.

针对DP600型汽车B柱加强板进行了工艺分析及拉延模面设计,并基于数据模拟软件对成型过程的模拟分析,对汽车B柱加强板进行了产品结构改进和工艺设计。

FEA analysis of stamping process for automobile B-pillar based on the software of PAM-STAMP

基于PAM-STAMP的汽车B柱成形有限元分析

Reaserch on Stamping of High Strength Steel Sheet Car B-Pillar Stiffer

高强度钢板成形轿车B柱加强板的研究

FEA Research on Cold Rolled Annealing Steel Plate Stamping Process for Automobile B-pillar

冷轧退火钢板冲压汽车B柱的有限元分析

Simulative Analysis and Optimization of Formability of Automotive B-pillar Reinforced Panel

汽车B柱加强板成型性模拟分析及优化

Research on the Influence of B Pillar's Intrusion Velocity and Deformation Mode upon Occupant Injury in Side Impact

侧面碰撞中B柱侵入速度及变形模式对乘员损伤影响的研究

Research on Formability of Car's B Pillar Affected by Different Drawbeads Types

拉延筋布置方式对汽车B柱内板成形质量的影响

Separate the B-pillar trim from the B-pillar.

从B-柱中拆下B-柱装饰。

Press the B-pillar trim on the B-pillar to secure.

在B-柱上压B-柱装饰直到牢固。

Separate lower B-pillar trim panel from B-pillar.

从B-柱上拆开下部B-柱饰板。

Remove B-pillar upper trim panel.

拆卸B-柱上部饰板。

Position door at B-pillar.

将车门安放在B-柱上。

Position striker on B-pillar.

将扣击板安放在B-柱上。

Double end studs (clamping type)--Product grade B

Gb/T901-1988等长双头螺柱bb>级b>

the axiomatic pillars of a new code of the law of nations(bWilliam Taylor)

国家法律新准则的公理的支柱(b威廉 泰勒)

The Clinical Study of HLA-B*27 Subtype and Ankylosing Spondylitis;

HLA-B*2704、05亚型与强直性脊柱炎的临床研究

Experimental Study of Biological Reduction Fixation System in the Treatment of Spinal Fracture;

运用B-RF内固定治疗脊柱骨折的动物实验研究

Numerical Simulation for the Influence of Spot Welding on the B-pillar Rigidity

焊点对于汽车B立柱刚度影响的数值分析

SYNTHESIS OF AMPHIHILIC SEMIFLUORINATED CYLINDRICAL BRUSHES PBIEM-g-(PAA-b-PFA) VIA ATRP

ATRP法合成两亲的含氟柱状刷PBIEM-g-(PAA-b-PFA)