Exploration on the study of wire and cable flammability by using cone calorimeter;
锥形量热计法研究电线电缆燃烧性能的探讨
Using cone calorimeter to study timber’s critical heat flux and ignition temperature;
锥形量热计研究木材临界辐射能流和点燃温度
Experimental Study of Flammability of PVC Composite Board by Means of Cone Calorimeter;
一种PVC复合板燃烧性能的锥形量热计实验研究
CONE Measurement and Thermal Degradation of ABS Treated with CuO Microcapsules;
CuO微胶囊处理ABS的锥形量热及热解
Melamine-formaldehyde resin were used to prepare microcapsules of CuO,Al(OH)3 and Al2O3 which were added into ABS as flame retardants,whose thermal behavior and flame retardance were determined by TG,DTG and CONE.
采用热重分析、锥形量热分析研究添加阻燃剂的ABS的热解行为,从热量释放、烟气、CO和CO2排放等参数表征其阻燃性能,并用Kissinger方程计算ABS的动力学参数热解活化能的变化。
The influence of montmorillonite on a intumescent flame retardant coatings was investigated by using cone calorimeter test(CONE).
采用锥形量热仪(CONE)研究蒙脱土(Na-MMT)对防火涂料阻燃性能的影响。
Then the flame retarding and smoke suppression of the flame retardant cotton fiber were determined by cone calorimetry.
对所得阻燃棉纤维采用锥形量热分析研究其阻燃、抑烟效果。
Study of halogen-free flame retardant polypropylene combustibility by using cone calorimeter;
用锥形量热仪研究无卤阻燃聚丙烯体系燃烧性
Fire Performances of Bamboo Floor Covering Compared to Wood Floor Covering by Cone Calorimeter Test;
竹地板与普通实木地板燃烧性能的锥形量热仪对比实验研究
Combustibility of Schima superba leaves using a cone calorimeter;
利用锥形量热仪测试木荷燃烧性能的方法探讨
The cone calorimeter based on the oxygen consumption principle can be conveniently used to measure not only heat release rates but also many other flammability properties during burning.
文中介绍了高分子材料锥形量热法测热的耗氧原理以及热释放速率的计算公式 ,并讨论了公式中的主要参数 (包括耗氧燃烧热值 E、膨胀因子 α和反应系数 β)对高分子材料热释放速率的影响以及相应的校正方法。
In this paper,typical upholstered furniture materials have been chosen to perform bench-scale experiments in Cone Calorimeter.
本文借助锥型量热计对制作软垫家具的材料进行小尺寸实验,获得了典型软垫家具面料、聚氨酯海绵填料及其组合件的燃烧性能参数。
Experimental measurements have been done for mass loss rate of wood using cone calorimeter and radiation platform for studying fire performance of materials at early stage, respectively.
文章分别利用锥型量热计和火灾早期特性实验台对柞木的失重速率进行了实验测量。
When water mists are applied to a pool fire,some of them would be evaporated and the incoming gas concentration in the cone calorimeter system would change,which would affect the heat release rate measurement significantly according to the theoretical calculation.
热释放速率是燃烧过程的基本特性参数之一 ,利用锥型量热计研究细水雾与池火相互作用特性时 ,部分细水雾会受热汽化并改变进入锥型量热计的气体浓度 ,导致热释放速率测量产生一定误差。
The Problems Existing in the Fire Investigating System and the Solutions;
锥形量热仪在阻燃材料研究中的应用
An integral model of cable ignition basedon the cone calorimeter test
基于锥形量热仪的电缆点燃积分模型
Application of Cone Calorimeter in Research of Fire Science
锥形量热仪在火灾科学研究中的应用
The Use of Cone Calorimeter Study the Combustion Properties of Floorings
利用锥形量热仪研究铺地材料的燃烧性能
Study on Fire Performance of PS/MH Composites by Cone Calorimeter
用锥形量热仪研究PS/MH复合材料燃烧性能
Research on combustion performance of wood and high polymer by conical calorimeter
木材和高聚物燃烧性能的锥形量热仪研究
Research on Flame Retardancy of Intumescent Halogen-Free Flame-Retardant Polypropylene Using Cone Calorimeter
用锥形量热仪研究膨胀性非卤阻燃聚丙烯阻燃性
Experimental research on fire behavior of cigarettes and its packing materials using cone calorimeter
基于锥形量热仪实验的卷烟及其包装材料燃烧特性研究
The flame-retardant properties of acrylate hybrid emulsion fire-retardant coatings studied by way of cone calorimeter
锥形量热仪法评价丙烯酸本体杂化乳液膨胀型防火涂料防火阻燃性能
tapered center-column rotameter
锥形芯柱式转子流量计
tapered tube rotameter
锥形管柱式旋转流量计
Hot Forging Deformation of Magnesium Alloys AZ31B Spur Bevel Gear
镁合金AZ31B直齿锥齿轮热锻成形研究
THE INSTALLATION OF CONE-SHAPED PUNCH FOR WSP250 HOT-ROLLED
WSP250热轧钢管工程锥形穿孔机的安装
tapered tube and disc type flow meter
锥形管圆盘式浮子流量计
CFD Simulation of Flow Field in V-cone Flowmeter
V形锥流量计内部流场的CFD数值模拟
Large Bore Pipe Gas Flow Measurement Using Cone Flowmeter
大口径管道气体流量测量采用锥形流量计
V-cone flowmeter characteristics for measuring vehicle diluted exhaust gas flow
用于汽车稀释排气流量测量的锥形流量计特性
Numerical Simulation of Flow Field and Heat Transfer in Annular Slot of Conic-Column Grain;
锥柱型药柱环形槽内流场与传热的数值模拟
CopyRight © 2020-2024 在线英语词典[www.yycidian.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024103067号