explosive in bulk

In this paper, it introduces the current situation and the development of blast charging in tunnels and analyzes the necessity for developing the automatic charging equipment for explosive in bulk.

介绍了国内外散装炸药装药技术与设备现状与发展,分析了研制隧道散装炸药自动装药设备的必要性,然后介绍了国内隧道散装炸药自动装药设备的研究过程与进展,最后展望了隧道散装炸药自动装药设备的应用前景。

In this paper, the accelerated aging tests at several higher temperatures are carried out for a kind of RDX compound explosive charge used in a certain missile warhead.

通过高温加速老化试验和统计分析,研究了某导弹战斗部中炸药装药的贮存寿命分布规律,在此基础上,建立了贮存寿命的可靠性评估模型,并对贮存温度下的平均贮存寿命及贮存寿命置信下限进行了评估。

The stress characteristics of the explosive charges at different charge conditions were simulated with drop hammer simulation device.

为了了解影响B炸药装药发射安全性的主要因素,利用大落锤模拟加载装置,采用"上下法"模拟榴弹发射时炸药装药所受的主要应力特性,对不同装药条件进行了模拟实验研究。

Based on a study of an explosive charge launching in the gun, a device and the corresponding projectile that can simulate the mechanical environment of the cannon upon launching have been established.

本文通过对炸药装药在火炮内发射的研究 ,建立能模拟火炮发射力学环境的装置及相应的研究炸药装药在膛内早炸的模拟弹 ,证实了装置模拟的可行性及模拟弹与实弹发射的相似律 ,从而建立起模拟实验系统。

Working principles of a setback-shock simulator for explosive loadingare studied in this paper.

本文研究炸药装药后座冲击模拟实验装置工作机制,用应力波理论分析重锤与炸药装药之间的相互作用过程,发现初始冲击波在加载卸载历史中不占主导地位;从刚体动力学观点将这种相互作用简化为二阶系统,可得到一组关于应力、应力率和应力脉冲宽度的表达式。

It is well known that bulk emulsion explosive has become a main direction in development of mining explosives.

散装乳化炸药已成为矿用炸药的主要技术发展方向。

The Research and Development on Automatic Control System of Mixing-loading Truck of Emulsion Explosive

乳化炸药混装车自动控制系统的研制

New Pumped Loading Technology Study on Tunnel Blasting Drivage;

隧道爆破乳化炸药泵送装药新技术研究

APPLICATION OF EMULSION EXPLOSIVE LOADING MACHINE TO ROCK BURST PREVENTION

乳化炸药现场混装技术在防治冲击地压的应用

ANALYSIS ON FAULT MECHANISM OF CARTRIDGE STACKING DEVICE FOR INDUSTRIAL EMULSIFICATION EXPLOSIVE

工业乳化炸药中包药卷码夹装置的故障机理分析

DENSITY OF EMULSION EXPLOSIVE AND SYNTHESIS OF NANO-MnFe_2O_4 POWDERS BY EXPLOSION

乳化炸药密度与纳米MnFe_2O_4颗粒爆炸合成

Blasting Beneficial Result Analytic Model of Loading Emulsion Explosive and Study on Optimization of Blasting Parameters;

混装乳化炸药爆破效益分析模型与爆破参数优化设计研究

The Calculating and Testing Research on the Fractural Range of Bench Shooting of Loading Emulsion Explosive in Deep Hole;

混装乳化炸药车深孔梯段爆破破裂范围计算分析及试验研究

Research of Mining the Material for Rock-fill Dam of Blasting Technique of the Mixed Loading Emulsion Explosive Truck;

乳化炸药混装车爆破技术开采面板堆石坝料的研究

Analysis of Cost Factors for Site Mixed Emulsion Explosive Blasting by Improved Analytic Hierarchy Process

改进层次分析法分析现场混装乳化炸药爆破成本影响因素

Research of Manganese Lithium Oxides for Detonation Synthesis;

爆炸合成锂锰氧化物的专用乳化炸药研究

DEVELOPMENT OF THE CONTINUOUS PRODUCTION LINE FOR 6t/h EMULSION EXPLOSIVES

6t/h乳化炸药连续化生产线的开发

NEAR FIELD DISPERSAL OF FAE FUEL UNDER LOAD OF UNCOUPLING CHARGE IN CENTER PIPE

不耦合装药爆炸作用下燃料空气炸药的近区抛散

Suggestions on Design of Emulsifiers Used in the Product Lines for Emulsion Explosives

对乳化炸药生产线中乳化器设计的建议

Thermal Decomposition Behavior of Emulsion Explosives Prepared by Multiple Emulsion

复合乳化剂制备乳化炸药的热分解行为

Study on Improving Storage Stability of Powdery Emulsion Explosive;

提高粉状乳化炸药贮存稳定性能研究

Analysis On Quality Control of Emulsion Explosives Production By Continuous Tech nology;

浅析连续法生产乳化炸药的质量控制

The Recent Research and Development Advice on the Emulsion Explosives in Our Country;

我国乳化炸药的研究近况及发展建议