combustion equipment

Experimental study on the slagging characteristics of biomass briquette combustion equipment;

生物质成型燃料燃烧设备结渣特性试验研究

According to the specialty of biomass briquette combustion and combustion equipment thermodynamic,the authon s practice and experience in designing combustion equipment,the main design parameters of the biomass briquettes combustion equipment are put forward.

根据生物质致密燃料燃烧特性、燃烧设备热力特性及作者设计燃烧设备实践与经验,提出了生物质致密燃料燃烧设备主要设计参数,在特制生物质致密燃料燃烧设备上,采用工业锅炉节能监测方法(GB/T 15317—1994)、工业锅炉热工性能试验规程(GB 10180—2003)、锅炉大气污染物排放标准(GB 13271—2001)和锅炉烟尘测试方法(GB 5468—91),按4种工况试验确定出单层炉排和双层炉排生物质致密燃料燃烧设备主要设计参数,从而为生物质致密燃料燃烧设备设计及技术改造提供科学依据。

On the basis of the monitoring and testing method for energy saving of industrial boilers(GB/T15317-1994),the thermal performance test code for industrial boilers(GB 10180-2003) and the emission standard of air pollutants for boilers(GB 13271-2001),the heating power parameters of a biomass briquette combustion equipment under eight different working modes were investigated.

本文采用工业锅炉节能监测方法GB/T15317-1994、工业锅炉热工性能试验规程GB10180-2003和锅炉大气污染物排放标准GB 13271-2001,在特制生物质致密燃料燃烧设备上,按8种工况试验测定了生物质成型燃料燃烧设备的热力特性参数,从而为生物质致密燃料燃烧设备设计及技术改造提供一定科学依据。

Based on the CFD software technology, the NOx removal process with selective non-catalytic reduction (SNCR) application, in a combustion research facility (CRF) thermal state test rig, was numerically simulated.

基于CFD软件平台,对燃烧研究设备(combustion research facility,CRF)中试试验装置的选择性非催化还原(selective non-catalytic reduction,SNCR)脱硝过程进行模拟计算,通过与试验结果的比较,验证了该文的数学模型和计算方法。

The resreach progress of pellet burning equipments

生物质颗粒燃料燃烧设备的研究进展

Development and Test Study on Biomass (Straw) Briquettes Combution Equipment;

生物质（秸秆）成型燃料燃烧设备研制及试验研究

Application of Network Plan in 300 MW Boiler Combustion Equipment Manufacture;

网络计划在300MW锅炉燃烧设备生产中的应用

Research Develop about the Good Water Coal Mixtures and the Technique Reformation in Burnable Equipments

优质水煤浆的研发与燃烧设备的技术改造

Research and Application of the Coal Fired Boiler Clean-Combustion Technology Equipment;

燃煤锅炉清洁燃烧技术设备的研究与应用

Development of Hydriding Combustion Synthesis Reaction Apparatus and the Preparation of Mg-Based Hydrogen Storage Alloy-Mg_2NiH_4;

氢化燃烧合成设备研制及镁基储氢合金Mg_2NiH_4制备

A failure in a device attributable to burning, excessive heat, or friction.

烧毁，烧坏由于燃烧、超高热或摩擦引起的设备故障

Application of Virtual instrument in High Temperature Air Combustion Research;

虚拟设备在高温空气燃烧研究中的应用

Improving Measures for Supply Fuel System in Combustion Chamber of Asphalt Concrete Plant

沥青混凝土搅拌设备燃烧器供油系统改进措施

A device for augmenting the thrust of a jet engine by burning additional fuel with the uncombined oxygen in the hot exhaust gases.

加力燃烧室通过燃烧热废气中所含的分离氧和附加燃料以增加喷气发动机推力的设备

Preparation of LiMn_2O_4 by Low Temperature Molten-Combustion Method

低温熔盐燃烧法制备LiMn_2O_4

The Effect of Asphalt Concrete Stirring Equipment Atomizer and Oil Pressure on the Burner Technology

沥青混凝土拌和设备雾化器、供油压力对燃烧器技术性能的影响

Application of Information Fusion Technology to Failure Diagnosis for Burner System of Asphalt Mixing Equipment

信息融合技术在沥青搅拌设备燃烧系统故障诊断中的应用

Recently, the university spent 30,000 dollars to change some of the equipment so it could burn both animal fats and tradition fuels.

最近，学校花了30000美金改造设备以便能够既烧动物脂肪也能烧传统的燃料。

Design and development test of a heavy-duty gas turbine combustor

重型燃气轮机燃烧室设计与试验研究

"Figure 41 is a safety relief valve for steam service on unfired pressure vessels. It is also used on accumulators, cleaners and distillers."

型号41安全阀适用于非燃烧式压力容器的蒸汽系统,也适用于蓄能设备、洗衣店和蒸馏设备。

Development and Application of Ceramics Industry Heat Equipment CAD System(Ⅴ) --Design of combustion facilities and flue passage

陶瓷工业热工设备CAD系统开发及应用(Ⅴ)——燃烧与排烟通风设置设计计算

Combustion Synthesis Preparation and Characterization of Mg/Mg_2Si Composite Material;

燃烧合成制备Mg/Mg_2Si复合材料及其表征