heat from arcing

the existent problem about the code of direct ratio in using DGA technical to judge arc discharge or arc discharge with over heat in a transformer is discussesd,forward the ad- vice in diagnosis instances is put.

对目前应用 DGA 技术判断变压器内部电弧放电及电弧放电兼过热故障的三比值编 码存在的问题进行了研究探讨，通过诊断实例提出了看法。

Analysis of low energy arc discharge characteristics based on linear current attenuation model;

基于电流线性衰减模型分析低能电弧放电特性

The morphologies and microstructures of the cathode deposits prepared by self-sustained arc discharge between graphite rods under different conditions were investigated by means of SEM and TEM,and the relationship between the morphologies and microstructures of the carbon nanotubes and the different conditions of arc discharge was obtained.

通过实现不同条件下的电弧放电,用扫描电子显微镜(SEM)和透射电子显微镜(TEM)对阴极沉积物中碳管的形貌和微结构进行表征,得到碳管的形貌和微结构与放电条件之间的一些对应关系。

The mathematical model of arc discharge for capacitive ignition was established and simulation was made.

建立了容性点燃时的电弧放电数学模型,并进行了仿真。

The technical processes of preparing onion-like fullerenes (OLFs)with different current densities by arc-discharge in water were explored.

研究了在不同电流值条件下纯石墨电极水下电弧放电法制备洋葱状富勒烯(OLFs)的过程和工艺。

In the practical running of domestic electrified railway,the arcing phenomena are found frequently when the electrical locomotive passing the overlap-phase;Using the air-breaking-down theory,the author analyzes the phenomena according to the construction of Articulated Neutral Section Insulator and the whole passing course.

在我国高速电气化铁道运行中,多次发现电力机车通过关节式电分相时产生电弧放电现象,笔者采用空气击穿放电理论,根据接触网关节式电分相的结构以及机车过电分相的过程,对该放电现象的成因进行了理论分析。

When a solar array with high voltage is put in low earth orbit, arcing may occur, which causes surface degradation, electromagnetic interference and other undesirable side-effects.

把高压太阳电池阵放入低地球轨道中就会发生电弧放电,造成航天器表面退化、电磁干扰、PN结破坏和其它负作用。

Three typical metal defects will be discussed in this paper: arcing defect during Aluminum deposition; ring type defect during metal etch; Aluminum protrusion defect during VIA barrier deposition.

本文主要研究了铝金属化工艺中出现的三种典型缺陷:在淀积铝金属层时产生的电弧放电缺陷;在淀积铝金属层后,蚀刻出金属互连线时产生的环状缺陷;以及在淀积通孔氮化钛阻挡层时产生的铝上窜缺陷。

The Studies on Onion-Like Fullerenes Prepared by Arc Discharge Method;

电弧放电法制备洋葱状富勒烯的研究

Synthesis of Cobalt-Doped AlN Nanorod by Arc Discharge

电弧放电方法制备Co掺杂AlN纳米棒

Inspection of the Electrical Arcing Damage on Generator Rotor and Analysis of the Overheating Material Structure;

发电机转子电弧放电损伤检验及过热组织研究

The research on kindling characteristic testing system of electrical arc discharge in intrinsic safety circuit

本质安全电路电弧放电点燃特性检测系统研究

Are there any visible arc marks on upper surfaces LPS rods?

* 避雷针的上部表面是否有可见的电弧放电痕迹？

In this work, we use the technology of DC arc-discharge to grow carbon nanotubes.

在本论文中，以电弧放电法成长奈米碳管。

Fluorination Reaction Under Ar-O2 Controlled Atmosphere DC Arc Discharge

氩氧控制气氛下直流电弧放电中氟化反应

Synthesis of Single-Walled Carbon Nanotube Films with Large Area and High Purity by Arc-Discharge

电弧放电法制备大面积高纯单壁碳纳米管薄膜

Method of Steel Descaling by Vacuum Arc Discharge

真空电弧放电技术应用于钢材除鳞的方法

Numerical simulation of arc plasma temperature based on ANSYS

基于ANSYS的空气电弧放电等离子体温度数值模拟

protective horn

消弧角保护放电间隙

Does the fluorescent lamp discharge in the form of glow or arc

日光灯气体放电是辉光放电还是弧光放电

A luminous discharge of current that is formed when a strong current jumps a gap in a circuit or between two electrodes.

电弧，弧光当强电流在回路裂缝或两电极间跃升时形成的辉光放电

The discharge of mercury arc is electric discharge phenomena of low pressure gas and the current density is great.

汞弧光放电是一种低气压气体放电现象,放电电流密度大。

Arc Discharge in the Vacuum Induction Melting and its A voidance

真空感应熔炼中弧光放电及解决办法

The Investigation of Nano-Film Prepared by Pulse Cathode Arc Discharge

脉冲阴极弧放电制备纳米薄膜的研究

Surface Strengthening of 45~# steel by Laser-Guided Micro Discharge

激光诱导微弧放电对45~#钢的表面强化

The Tracking System about Electric Discharge Point of Short Electric Arc Numerically-Controlled Machine Tool;

数控短电弧加工机床极间放电点目标跟踪设计