maxtack steel

Based on ‘Green Machining’, experimental work on high speed milling of hardened mould steel under nitrogen-oil-mixture medium, air-oil-mixture and dry milling has been done.

文中基于“绿色制造”理念,在干铣削、空气油雾、氮气油雾介质下进行了淬硬模具钢高速铣削的铣削力试验研究,分析了铣削力随铣削长度、铣削速度、径向进给、轴向进给及每齿进给的变化规律。

Based on tribology principle of TiAlN coated tool,experimental work on high speed milling of hardened mould steel under nitrogen-oil-mixture medium, air-oil-mixture, water solubility cutting and dry milling has been done.

基于涂层刀具的摩擦学机理,通过干铣削、水溶性切削液、空气油雾、氮气油雾介质下淬硬模具钢高速铣削磨损试验的研究,得出氮铝钛(TiAlN)涂层刀具高速铣削淬硬模具钢时的磨损规律与寿命。

By the experience machining hardened carbon tool steel T10A with ceramic tools FG-1,LT55 SG-4, and the experience machining Co-alloy with ceramic tools LT55 ,SG-4,cutting performances of the three ceramic tools in machining hardened carbon tool steel T10A were investigated ,as well as the better cutting parameter were got in machining Co-alloy with ceramic tool SG-4.

通过采用陶瓷刀具FG - 1、LT5 5、SG - 4切削淬硬工具钢T10A和采用LT5 5、SG - 4陶瓷刀具切削钴基合金的切削试验 ,研究了 3种陶瓷刀具切削淬硬工具钢T10A的切削性能 ,并得出陶瓷刀具SG - 4切削钴基合金时比较理想的切削参数。

Hole making process by helical milling on hardened die steel was performed, the component forces were tested by Kistler dynamometer, the effect of cutting speed and orbital speed on cutting force was quantitatively discussed.

本文针对难切削加工材料高硬度模具钢Cr12(58HRC)和钛合金(Ti-6Al-4V)的螺旋铣孔工艺进行切削过程动力学及其试验研究,主要完成以下几个方面的工作:分析了螺旋铣削动力学原理,定性的分析了影响螺旋铣孔过程中切削力的主要因素,搭建了螺旋铣孔切削实验和分析平台,完成螺旋铣孔实验方案的设计。

Research of Distortion Rule and Crumb Micro-character of Hardened Mould Steel in High Speed Milling

淬硬模具钢高速铣削切屑显微特征与变形规律

Wear Rule and Life-span Research of TiAlN Coated Tool in High Speed Milling Hardened Mould Steel

TiAlN涂层刀具高速铣削淬硬模具钢时磨损规律与寿命的研究

Research on Mechanics Modeling and Computer Simulation in Orthogonal Cutting of Hardened Die Steel;

淬硬模具钢正交切削的力学建模与计算机仿真研究

Research on Technology Parameter Optimization of High Speed Milling of Hardened Steel Mould;

淬硬钢模具高速铣削工艺参数优化研究

Investigation of High-peed Milling of Hardened Cr12 Die Steel by Ball End Mills

球头铣刀高速铣削淬硬Cr12模具钢的研究

Numerical Simulation and Experimental Study on Hard Turning of Hardened Steel Using PCBN Cutting Tools

PCBN刀具硬态切削淬硬轴承钢的数值模拟与实验研究

A Comparison Study on Wet & Dry Cutting Hardened Steel with PCBN Cutting Tools;

PCBN刀具干湿切削淬硬钢对比研究

Study on interrupted turning of hardened steels with PCBN tools

PCBN刀具断续车削淬硬钢的试验研究

Study on High Speed Cutting Hardened Steel with the Coated Insert (CN35);

硬质合金涂层刀具（CN35）高速车削淬硬钢的研究

surface hardening steel

低淬透性钢, 浅淬硬钢, 表面硬化钢

Study on Experiment of Ultrasonic Vibration Turning 45 Hardened Steel with PCBN Tool

PCBN刀具超声振动切削45淬硬钢的试验研究

Comparison of wear during dry and wet cutting of quenched steel with PCBN cutting tool

PCBN刀具干湿切削加工淬硬钢时的磨损对比

Development and trial of mold steel slab water-jet quenching system

模具钢板坯喷水淬火系统研制与试用

Development and Application on Water-jet Quenching System for Mold Steel Billet

模具钢板坯喷水淬火系统的研制与应用

The Optimization of Cutting Parameters in Turning Thin-walled Workpieces of Hardened Steel Using Cermets Tool

用金属陶瓷刀具加工淬硬钢薄壁件切削参数优化

Study on Cutting Temperature under Ultrasonic Hard Turning 45 Hardened Steel

超声硬切削45淬硬钢的切削温度研究

Study on FE Simulation of Chip Formation and Temperature Field during High Speed Machining Hardened Steel;

高速切削淬硬钢切屑形成过程及温度场有限元模拟研究

Modeling and Surface Integrality Prediction for Precision Cutting of Hardened Steel GCr15

淬硬钢GCr15精密切削过程的建模与加工表面完整性预测