fan

The principle of precompensation for deformation was presented,which was applied to the shaping of an automobile fan and effectively helped lower the shrinkage deformation and warpage of the product.

介绍了变形预补偿的原理,以汽车风扇为例,成功地降低了汽车风扇的收缩变形和翘曲变形,为解决制品变形问题提供了一条新的思路。

ATOS laser flow survey meter was used to measure the deformation data of automobile fan.

介绍利用ATOS激光流动测量仪对汽车风扇进行测量,获取风扇变形后的数据。

To compare the differences of application of Multiple Reference Frame(MRF)method and sliding mesh method in automotive engineering,the two methods are used to simulate rotating airflow area of automotive fans based on FLUENT software.

为比较多参考坐标系(Multiple Reference Frame,MRF)法和滑移网格法在汽车工程应用中的差异,基于FLUENT软件,分别用这两种方法对汽车风扇旋转流动区域进行数值模拟,得到汽车前端发动机冷却系统流场的计算结果;比较两种计算结果中前端冷却气流的流量、压力分布以及风扇局部流场的分布。

Fan/compressor aero design trend and challenge on the development of high bypass ratio turbofan;

风扇/压气机气动设计技术发展趋势——用于大型客机的大涵道比涡扇发动机

Fan/Compressor Aero Design Technology for High Bypass Ratio Turbofan;

大涵道比涡扇发动机风扇/压气机气动设计技术分析

Application of Softwares in Computational Fluid Dynamics Simulation of Fan;

软件接口方法在风扇CFD模拟中的应用

According to the definition of the three-dimensional swept leading edge,a comparison was made between three different swept transonic rotors to study how different leading edges affect the position and intensity of shock waves,and consequently the performance of fans.

本文从叶片前缘曲线掠的形式入手,采用适合叶轮机械内三维流动特点的相对掠概念,把叶片前缘曲线相对掠应用到设计中,探讨叶片前缘曲线相对掠(包括相对前掠、相对无掠和相对后掠)对通道激波的方位、强度的影响,以及由此造成的对风扇性能的影响,并进行了数值模拟,从得到的结果可以看出转子前缘曲线对风扇/压气机的性能影响非常明显,并对设计在气动方面的优化有一定的指导作

Analysis on the Transmission Torque of SMA Auto Fan Clutch

SMA汽车风扇离合器传递转矩分析

Research on Injection Molding Simulation and Warpage Compensation of Automotive Fan;

汽车风扇注塑成型及变形预补偿的研究

Research Complex Strengthening Technology of Automotive Fan Belt Plate Composite Drawing Die

汽车风扇带盘拉深模具复合强化工艺研究

The failure Analysis of. Drawing Die for the Fan Pulley and Study on the plasma Spraying for the Anti-Wearing Strengthening

汽车风扇皮带轮模具的失效分析及等离子喷涂强化研究

The car has a fancooled radiator.

这部汽车有一个由风扇散热的冷却器。

Design of Speed-adjusting System with Frequency Conversion for Fan Motor in Driver’s Cab

汽车驾驶室风扇变频调速系统的设计

CFD Analysis on Performance of Automobile Engine Cooling Fan

汽车发动机冷却风扇性能的CFD分析

Study on Aerodynamic Performance and Aero-acoustic Performance of Engine Cooling Fan;

汽车发动机冷却风扇气动性能和声学性能研究

CFD Analysis and Optimization Design for Engine Cooling Fan Performance of Heavy-duty Truck

重型汽车发动机冷却风扇性能的CFD分析与优化

Research on High Flow Rate & Low Noise Cooling Fan of Heavy Duty Truck

重型载货汽车高流量低噪声冷却风扇研究

A research of Intelligent Controlling System of Automobile Engine Cooling Fan

汽车发动机冷却风扇智能控制系统的研究

The cooling system's fan motor ensures sufficient engine cooling at slower vehicle speeds.

该冷却系统的风扇电机保证了在车速较低时对汽车发动机进行充分冷却。

The car crashed through the glass door.

这辆汽车闯过那扇玻璃门。

To prevent premature part failure and consequential damage, it is important to pay special attention to the quality of the fan motor used.

为了防止汽车零部件过早失灵并造成相应危害，要特别注意所用风扇电机的质量。

one windmill held out against the steam-driven flour mills and kept on turning its sails.

仍有一座风车磨坊一直与那些蒸汽驱动的面粉厂相抗衡，继续地转动扇叶。

CFD Design and Optimization of the Cooling Fan for Turbo-Generator

汽轮发电机通风冷却风扇CFD设计与优化

Measuring and Controlling System of Efficiency Test Stand for Axial Fan in Turbogenerator

汽轮发电机轴流风扇效率模拟试验台测控系统

Abnormal Noise and Proper Use of Low Emission Gasoline Engine Fan Belt

低排量汽油机风扇皮带的异响及正确使用