rubber flange

Twenty four groups of different geometric parameters of road wheel s rubber flange of tracked vehicle were chosen by adopting uniform design method.

采用均匀设计法 ,选取履带车辆负重轮橡胶轮缘的 2 4组不同几何参数 ,建立橡胶轮缘的三维有限元分析模型 ,用 ANSYS有限元分析软件计算橡胶轮缘的位移、应力和应变分布情况 ,最后对橡胶轮缘的最大径向位移、应力和应变进行多元线性回归 。

The insulated rubber fittings for new high-pressure switch are three layers midheaven structure in which inside and outside layers are conductive rubber and the medium layer is insulated rubber,and metal parts are embeded in two positions.

新型高压开关体系所用橡胶绝缘体配件为三层中空结构，内、外层为导电橡胶，中间层为绝缘橡胶，有两处埋设金属件。

Methods of improving properties of the aramid cord/tire rubber system and the research for it in home-abroad are reviewed in details,especially in China,America,Japan,Germany and some countries in Europe the study is perfectly carried out.

重点阐述了增强芳纶帘子线/轮胎橡胶体系性能的途径及国内外研究进展:中国、美国、德国、日本和欧洲一些国家对该领域进行较深入地研究,主要是通过芳纶表面、轮胎橡胶和间苯二酚-甲醛-胶乳体系(RFL)3方面的改性来增强芳纶-RFL-轮胎橡胶体系性能。

A loaddeformation testing system is established for executing the uniaxialtension testing of the tire rubber in a larger deformation range.

本文利用自动网格法光学测量技术的非接触、高精度以及可以获得全场变形信息等优点,建立了一套包含图像采集功能的载荷-变形同步测试系统,来实施轮胎橡胶单向拉伸较大变形力学行为的测试。

The trends of tire technology,tire performances, requirements of tire rubbers,and recent developments of tire synthetic rubbers were analyzed.

简介轮胎技术的发展趋势，指出高性能轮胎的性能要求，必须开发新的轮胎橡胶。

On the basis of UG, the five-axis processing method of moulding copper electrode for rubber tyre floral texture of electrical bicycle is stated.

阐述了在UG软件中电动自行车橡胶轮胎花纹的成型铜电极的五轴加工方法。

By using catalyst A, the catalytic splitting decomposition of waste rubber tyre was developed.

一种先进的废旧橡胶轮胎催化裂解处理技术被开发，通过反应器的废橡胶轮胎颗粒被催化裂解为裂化气、汽油馏分、柴油馏分和重油馏分，残余的固体可加工为炭黑，各种产品经检测，其理化指标及使用性能均达到用户要求。

Aiming at the existing problem of storing and taking rubber tyre in the full-automatic storehouse,lower using rate of storehouse and tyre deformation because of the difficulty in adjusting the tyre orientation,the paper introduces a new automatic three-dimension rubber tyre storehouse,concept is artful,design is reasonable and structure is simple.

针对目前橡胶轮胎储存全自动仓库存在的存取困难、仓库空间利用率低、轮胎方位不好调整导致轮胎变形等问题,提出了一种构思巧妙、设计合理、结构简单的新型自动化立体橡胶轮胎仓库。

Matters Needing Attention in the Application of MV EPR Insulating Compounds

中压乙丙绝缘橡胶电缆料应用中注意的问题

PVC and rubber insulated cable

聚氯乙烯橡胶绝缘电缆

incity telephone cable with rubber insulation

橡胶绝缘市内电话电缆

general-purpose rubber insulated and sheathed trailing cable

通用橡胶绝缘铠装拖缆

rubber base isolatio

以橡胶为原料的绝缘体

Vulcanized rubber--Determination of the insulation resistivity

GB/T1692-1992硫化橡胶绝缘电阻率测定

double core rubber insulated lead sheathed and armored cable

双芯橡胶绝缘铅包铠装电缆

Telephone wires are often insulated by a covering of rubBer

电话线常包一层橡胶绝缘。

glass-wool coated silicon-rubber insulated wire

玻璃纤维被覆硅橡胶绝缘线

"Electrical insulators include rubBer, plastic, porcelain, and mica."

电绝缘体包括了橡胶、塑料、陶瓷和云母。

Rubber is used to insulate electric wires.

橡胶被用来使电线与外界绝缘。

The wires must be insulated from touching each other, with a rubber covering.

这些电线必须用橡胶皮包住相互绝缘。

an electric cable insulated with rubber

用橡胶作绝缘材料的电缆

Application of Moldflow software in silicone rubber insulator processing

Moldflow软件在硅橡胶绝缘子加工中的应用

Inspection and Analysis on the Aging of Silicone Rubber for Composite Insulators

复合绝缘子硅橡胶材料老化性能分析

Cabsil Process of EPR Power Cables Compound

乙丙橡胶电力电缆绝缘一步法硅烷交联工艺

Rubber, which is a standard insulating material, is liable to deteriorate.

橡胶是标准的绝缘物质，但它的阳光下容易老化。

Flashover Characteristic of Silicone Rubber Insulator in Contaminated Environment;

污秽环境下硅橡胶绝缘子闪络机理的研究