heating unit

Homogeneously heating can be obtained by employing the steel tiles as thermal balance medium in horizontal roller track style tempering oven and the steel tile can also act as a protector of heating element.

采用钢瓦作为水平辊道式钢化炉热平衡介质,实现了均匀加热,并对加热元件有保护作用。

A trapezoid heating element used in plate film evaporator was presented in this article.

本文提出一种在板式自由流降膜蒸发器中使用的梯形加热元件 ,可使得加热元件上、下端的液膜厚度保持一致 ,避免了壁面的干涸现象 ,极具实用价值。

In the paper,the authors analyse the damage reasons of traditional Ni Cr Heating elements,and introduce both the advantages and the economic effects of adopting silicon carbide rods as heating elements.

分析了反射式铝保温炉传统加热元件 Ｎｉ Ｃｒ 电热合金过快损坏的原因。

Design of heating device for magnesium alloy isothermal forging and temperature curve of die;

镁合金等温锻造加热装置的设计及模具温度曲线

The article gives brief introduction of the design principle and structure of the improved heating device in floating-roof storage tank and analysis is carried out on the security and reliability of the high gel point crude oil under the application of intermittent heating condition.

介绍了改进后的浮顶式储罐加热装置的设计原理及结构,对其应用于间歇供热条件下储存高凝油品的安全性与可靠性进行了分析,并用模型罐进行了模拟试验。

This article introduces the anneal process,step,main point of50ton convertor,especially for the installation of heating device,operation and temperature control of anneal heat treatment.

介绍50t转炉炉壳的整体退火工艺过程、步骤、要点,着重介绍了加热装置的安装、操作及退火热处理温度的控制。

This paper focuses on the influence of the flange and bolt heating equipment on differential expansion of HP casing in 200MW steam turbine.

主要探讨200MW汽轮机组法兰螺栓加热装置对高压缸胀差的影响。

The performance of U-type radiant tube heating unit is studied,and the structures and forms for air distribution board and air distribution loop which are used for achieving grading combustion of burn-er are defined.

实验研究了U型辐射管加热装置的性能。

stratit element

钼[钨]电阻加热元件

vacuum tube solar heating element

真空管太阳能加热元件

cartridge heating element

筒形加热器,筒式加热元件

Main produces are heating parts for the vacuumelectric resistance fumace or for the vacuum induction heaters and heating pipes for the carbon pipe furnace.

真空电阻炉用加热元件、空感应炉用各种石墨元件、管炉用的加热管。

Electric heating elements shall be screw-in, direct-immersion, resistance-type heating elements.

电气加热元件应该螺纹拧进的，直接浸入式，电阻型加热元件。

chafing-dish, without heating elements, of copper, non-electric, for domestic use

家用铜火锅,不带加热元件,非电力的

coffee-pot without heating elements, non-electric of aluminium ,for domestic use

家用铝制咖啡壶,不带加热元件,非电动

coffee-pot without heating elements, non-electric, of copper, for domestic use

铜制家咖啡壶,不带加热元件,非电动

Replacing heating element without having to deplete the container.

不需要贮罐排空即可更换加热元件。

gridiron without heating elements of iron or steel

箅子,不带加热元件,钢或铁制

Remove the access door(s), insulation and element cover(s).

拆卸观察门，绝缘保温层和加热元件盖。

Welding of electric heating element used for pressurizer

核一级设备稳压器电加热元件的焊接

Selection of far infrared heating elements in low temperature resistance furnace

低温辐射电热炉的远红外加热元件的选择

3rd Discussion about the Application of Mental Fubular Electric-heating Component in Electric Boiler

三谈金属管状电加热元件在电加热锅炉中的应用

As a n ew heating element for high temperature electric furnace, it can be used up to1900℃ with the furnace temperature of1800℃.

铬酸镧加热元件可用到1900℃，炉温可达1800℃是一种新型的高温电炉用加热元件。

copper ,wash, without heating elements, of aluminium non-electric, non-mechanical, for domestic use

家用洗涤大锅,不带加热元件,铝制,非电动,非机械

linen-press, wooden (incl. those equipped with heating elements)

木制家庭日用织品衣橱（包括装有加热元件的）

electrical heating elements contained in a flexible pad.

在一个带有韧性的垫子内含有电子加热元件。