semi-cylinder experiment method

Semi-circular bending test is a process that adding a con.

半圆弯拉试验是在规定尺寸的简支半圆形试件跨中,给试件施加集中荷载至试件断裂破坏的试验,并由破坏时的最大荷载计算材料的抗拉强度。

Based on the semi-circular bending test,the delayed cracking properties of asphalt mixture,a typical viscoelastic-plastic material,are evaluated using the J-integral theory and the delayed-cracking initiation time.

文中通过半圆弯拉试验,采用J积分理论和延迟开裂时间评价其延迟开裂性能,测得在不同荷载水平和不同试验温度下沥青混合料的延迟开裂时间,以及不同试验温度下的断裂韧度,研究其裂缝起裂规律。

Research on Dynamic Response and Fracture Performance of Asphalt Mixture Based on Semi-Circular Bednding Test

基于半圆弯曲试验的沥青混合料动态响应及断裂性能研究

Bend test for coating (cylindrical mandrel)

GB/T6742-1986漆膜弯曲试验(圆柱轴)

alternative wrap around guided-bend test

交变缠绕定向弯曲试验

flexing ozone weather testing chamber

臭氧腐蚀弯曲试验箱

testing method for flexing endurance of light leathers and their surface finishes

皮革耐弯曲性试验方法

testing method for flexural creep of plastics

塑料弯曲蠕变试验法

rotary bending tester

旋转弯曲疲劳试验机

rotating bending fatigue machine

回转弯曲疲劳试验机

reversed bending fatigue machine

反复弯曲疲劳试验机

Test methods for bare wires--Bend test--Single bend test

GB/T4909.6-1985裸电线试验方法弯曲试验单向弯曲

Test methods for bare wires--Bend test--Reverse bend test

GB/T4909.5-1985裸电线试验方法弯曲试验反复弯曲

Methods of test for enamelled wires--Mandrel winding test for rectangular wires

GB/T4074.7-1983漆包线试验方法扁线弯曲试验

The Bending Problems of Circular Plate on Transversal Isotropic Elastic Half-space

横观各向同性弹性半空间地基上圆板的弯曲

A piece of round or square-section bar must be bent through a specified angle without it cracking to be accepted by this test.

一个圆的或方截面试棒被弯曲一个规定的角度不发生开裂，被视为该试验合格。

The limit bending capacity of a round-corner-rolled crankshaft is measured with the testing machine.

利用该试验机对日本大发公司生产的经过圆角滚压处理的曲轴的极限承载弯矩进行了测试。

Plastics--Determination of flexural properties by use of small specimens

GB/T16419-1996塑料弯曲性能小试样试验方法

EXPERIMENTAL INVESTIGATION OF A DOUBLE CIRCULAR ARC CASCADE WITH 73° CAMBER

弯度达73°的双圆弧叶栅的试验研究

The curve experiment has obtained curve radius of inertia advance curve and static curve;

转弯试验测得了机器鱼惯性前进转弯和静止转弯时的转弯半径;