spider

Effect of ultrasonically melt treatment method on solidification structure of pure aluminum ingot;

超声波熔体处理方法对纯铝铸锭凝固组织的影响

Research on Bulky Compound of 7A52 Alloy Ingot under Funnel;

7A52合金铸锭漏斗底结物形成原因

Effects of 5083 aluminium alloy ingot homogenizing on properties and structures of ingot and plates;

5083铝合金铸锭均匀化处理对铸锭和板材组织与性能的影响

Effects of Melt Treatment Methods on Degassing Efficiency of Ultrasonically Refined Al-1.65%Si ingots Under Different Ultrasonic Frequencies;

不同超声波频率下熔体处理方法对Al-1.65%Si铸锭除气的影响

Effect of Ultrasonic on Structure of Aluminum Alloy Ingots;

超声波对铝合金铸锭组织的影响

In this study,the effect of ultrasonic treatment time on crystallization structure of industry pure aluminum ingots was investigated.

研究了超声波处理时间对工业纯铝铸锭结晶组织的影响,即添加除气剂又进行超声波处理的情况。

ingot mould of metal for use in metal

金属铸造金属铸锭模

Quality Control of Recycling Magnesium Alloy Ingot and the Casting Machine Design;

再生镁合金铸锭质量控制及铸锭机设计

Melting and Casting Process Investigations on Large Size Ingot of AA5182 Al-Mg Alloy;

AA5182大型Al-Mg合金铸锭熔铸过程研究

Research on Homogenization and Mass Transfer in AZ61 Magnesium Alloy Ingot;

铸态AZ61镁合金铸锭均匀化处理及扩散传质研究

Quantity and Influences in the Casting Lies the First Area of Cooling and Crystallize in Common Mold

普通模铸造一次冷却结晶区的铸锭质量及影响

Effects of Casting Process on Ingot Microstructure and Forgeability of B30 Alloy

铸造工艺对B30合金铸锭组织及可锻性的影响

Design of 2124 aluminium alloy 255 mm×1500 mm ingot specification casting tool

2124铝合金255mm×1500mm铸锭专用铸造工具的设计

Effect of Processing Parameters on the Thickness of Outside Layer of 7075/6009 Aluminum Alloy Ingots

铸造参数对7075/6009铝合金铸锭外层厚度的影响

Zirconium and zirconium alloy ingots for nuclear application

GB/T8767-1988核工业用锆及锆合金铸锭

In the case of rimming steel, no or some deoxidation is carried out before casting.

沸腾钢在铸锭前不脱氧或轻度脱氧。

Influence of Heat Treatment on Segregation of TB6 Alloy Ingots

热处理对TB6合金铸锭偏析的影响

Study of Production Process for BFe10-1-1 Casting Ingot

BFe10-1-1铸锭生产工艺研究

Zinc alloy ingots for casting

GB/T8738-1988铸造锌合金锭

Aluminium alloy ingots for casting

GB/T8733-1988铸造铝合金锭

Bearing alloy ingots for casting

GB/T8740-1988铸造轴承合金锭

The moulds are made of cast iron.

钢锭模是用铸铁做的。

Bronze ingots for casting

GB/T8739-1988铸造青铜锭

Brass ingots for casting

GB/T8737-1988铸造黄铜锭